Originally Posted by jlask

@I)arkness

hudy setup

at the last pages there is a diagram with everything you should do with priority level depending on the problem you have.

wet
height front 3
height rear 4
silver (soft) springs front
red (soft) spring rear a bit tight, 600silicone
a bit loosen tbar middle screw (1.5mm tbar)
camber 1.5
toe 0 to +1 depending on the track
& diff grease RB
diff not blocked (not too tight)

sunny
everything the same except front springs gold (medium)
and diff a little bit blocked