Originally Posted by
IndyHobbies.com
Suggestions on belt tightness?
I understand that the tension on both belts should be as equal as possible so that both front and back wheels pull as hard, and at the same time, as each other.
I've bought two used TC5's. One came to me with the belts somewhat loose (3/8" up and down on the large one) and the other the belts came very tight. Not guitar strings, but pretty darn tight.
What is considered normal? The manual addresses the mounts, but not really tension that I found.
Tightness depends on what motor you are running. Mod motors you should run fairly tight, slower motors u run looser. Like in 10.5 I run pretty loose.