Just finished getting the car back together with the SC10 gear diff. Starting with 3k oil.
I need more shims but I put enough on one side so the idle gear doesn't hit the side of the diff that has the backing to the teeth.
Also, make some caster changes & front/rear roll center adjustments too. Ride height is higher than Sunday's setup, and I finally got both left/right front camber & toe settings evened out. Really want to buy the Hudy setup board, but that's money I don't necessarily need to spend right now.
Also, dropping to a 24T pinion from 25. Should give me alittle more punch, as this 6.5 has plenty of top end.
Tuesday is next track visit. Will report on my progress tomorrow night.
-Auto