Originally Posted by
jermpool
It's garnet, I was trying to get it the same color as my camaro that I had when I was younger. I got real close by using rattle cans but not quite there. I think I am just going with a candy red on this one and try for the garnet on the next one.
Here is a truck that is the same color.
If you look at the 68 camaro that I did a page or so back, it is very close to the same color you are looking for. I used a rattle can of Tamiya transparent red and then backed it with 1 coat of silver metal flake 2 light coats of pactra racing red(until I got the desired color depth/darkness) and then finished with a coat of pactra silver. Go really light on the racing red! When you think it needs 1 more coat to get it dark enough stop and back it with silver! The silver will darken it up more... Hope this helps you!