Gentlemen, I need some help to get this rear end locked in. Posted below is my current setup. I have the 1.2 sway bar, 3.5 degree rr block, and ball diff on order as well. I race 10.5 asphault with tekin esc and murfdogg motor/battery combo. Tires tried included CS-27, Solaris spec medium and hard, Jaco Blues, and Much More absolute 28's. Track temp was apprx 70-75 degrees. I have the s411 L.E.
here is my set up:
Front Rear
Camber 1.0 1.5
sway bars 1.4 1.4
ride height 5.0 5.5
A arms centered A arms spaced all the way to the rear
spool Gear diff with 25, 40 , 60, weight shock oil and 1200 it was the best with 40 wt.
4.0 caster blocks
using downstop gage like on set up sheet
5.5 6.0
shocks
front
orange serpent spring 3 holes open 500 cst oil, position upper 4, lower 2
rear white tamiya spring 3 holes open 500 cst oil position upper 3, lower 2
front link in standard locations with inner link 4.0mm spacer
rear link is shortest possible inner spacer 3.0mm outer 4.0mm spacer
Protoform LTC-r body
it is loose mid corner all the way through exit and has a push on power. Any ideas will be appreciated. Thank you very much.