hokie6260

iTrader: (11)

I fried my ESC in my buggy Friday. So I had this laying around that came in on a trade a while back. Trying to throw this in as a quick fix until the new setup comes in. I can't figure out where the power switch plugs into and also where does the lead that goes to the Rx plug in??

KA2AEV

iTrader: (1)

Try it without the on off switch, just be careful when you plug the battery in
you might not need it!

If you know what the model number of the ESC is, try googling a manual for it!

hokie6260

iTrader: (11)

I've tried to figure out what ESC it is and haven't. I'm not so much worried about the on off switch. But have no idea where the lead that plugs into the Rx goes.

KA2AEV

iTrader: (1)

do you have the jumper that goes between the Rcvr and the ESC?

hokie6260

iTrader: (11)

Yes, just not sure where it plugs into the ESC

hokie6260

iTrader: (11)

Its an older Novak. But can't find a model number

rannblod

iTrader: (1)

Looks like it could plug into some of those prongs on the front/back of the esc.

KA2AEV

iTrader: (1)

What does the jumper plugs look like???

rannblod

iTrader: (1)

looks like hook ups for fan ,on off switch. Esc wire

Golddust

Okay there you go
The first plug off of the esc' sensor plug is red
So the fourth one from the sensor plug is positive also, etc...

Golddust

Btw great photo rann!

rannblod

iTrader: (1)

Not a problem anything to get an RC back in action

hokie6260

iTrader: (11)

Thanks for the pic. So, is there an adapter lead i need to get then?

rannblod

iTrader: (1)

Yeah the one that runs from the esc to the rx.

rannblod

iTrader: (1)

https://www.amainhobbies.com/novak-1...UCUaAr9q8P8HAQ

This one should work