torment1106

I just bought a ECX Torment rc car and when i use it it barely makes the turns and i was wondering if there is anyway to fix it so it makes sharper turns. Thank you!

ThePanda

iTrader: (68)

soften the front suspension and stiffen the rear. softer tires will also help.

tajar66

iTrader: (6)

Check the end point adjustments

klaymon

iTrader: (71)

Do this first.

torment1106

what are the endpoints? im sorry im new to rc cars

lbenton

iTrader: (48)

It is a setting on the radio, it is the amount travel right and left the steering servo is allowed to execute.

torment1106

on the controller right? i feel like it just not strong enough to push it to the sides for some reason but ill try to do the end point thing and let you guys know

ThePanda

iTrader: (68)

if it can turn normally at low speed then it is a tire or suspension issue. if it turns wide at low speed as well it is a endpoint issue. endpoints are adjusted on the radio. check the manual and there should be something about radio settings.

torment1106

i fixed it guys thank you it was some adjustment on my controller