Blade Inductrix FPV Pro
 

This is the Unboxing, Maiden Flight, and Review for the new Blade Inductrix FPV Pro Micro FPV Drone.

In this video I compare it to some other Compact FPV Drones such as the Original Blade Inductrix, Poke FPV, and the Blade Nano QX2 FPV. I didn't buy an original Blade Inductrix FPV, which was modeled after the Tiny Whoop, but I did discuss some of the differences between the two in the video.

Here are my review notes:

Pros
- It looks really cool
- More responsive
- 19,000 kv motors
- An upgraded airframe for durability
- Comes with a bigger battery than the original Inductrix
- Maiden flight was nearly 4 minutes
- 5.8GHZ FPV
- It is BNF so I can use it with my Spektrum DX6
- Betaflight configurable
- It is lighter than the original Blade Inductrix FPV

Cons:
- It is much louder than I expected
- It experienes random shakes or "jumps" in the air
- 25mW camera/VTX combo
- The VTX gets hot pretty quickly

I am every curious to see how this performs outside as I hope it is something I can fly when I take out my EMAX Babyhawk too.

I bought the original from a friend who only used it twice and with bigger batteries of 250 mah I get barely 2 1/2 to 3 minute flight times. Absolutely horrible on flight times. So disappointed with that ... I wonder if there's some sort of excessive power draw by the camera if you are getting four minutes of flight time

This one has a new camera combo, so it may be easier on the battery as a result.

Here is my first FPV video with it :)

FPV Drones such as the Poke FPV and the Blade Nano QX2 FPV at the same location.

I got an inductrix there mad indoor flyers

I might try to see if its might fly ok with a better battery. The battery drain is understandable

Totally and the 1S batteries for these have short life cycles normally.

I finally made an indoor video with this!

You're welcome!