blade cx2 constantly loses connection

sexystover · 09-27-2009, 01:18 PM

i just charged up my batt and the tx has 6.3v still but after turning on the cx2 and turning on the tx the cx2 arms the 4in1 system as usual but if i give it right stick input either to the left or right to control the servo it will loose connection (orange light for reciever goes off) but then after a second it will come back on as if i have just turned it on and it will re arm it self. i can use the throttle and forward and back controls but if i try to use the right/left control it will cutout and restart itself. anyone have any answers for me. im stumped and cant seem to figure out why it only looses conection when i try to move left or right

sorry for my terrible heli terminology. i just got the cx2 on friday

sexystover · 09-28-2009, 02:47 PM

ive been searching and have come up with nothing. 27 views and no help. no one has ever had this problem?

31794ty · 09-29-2009, 06:23 PM

Replace the batteries in the remote.

sexystover · 09-30-2009, 02:31 AM

tried it, still no good

RC_helihog_7 · 11-01-2009, 03:22 PM

I have heard of similar problems with the cx3. What I found out from a local source is that the reciever might need to be updated. The cx3 was doing the same thing and the factor change out the recievers and now no problems have come about. This is what they factory is calling a "brown out". I know that the recievers cost about 60 USD. I know because I have to replace mine on my cx3 because my reciever got damaged when it crashed into the ground.