OFFICIAL BOAT THREAD! - Page 9

chewiefttc4 · 04-07-2009, 03:13 PM

you DONT wanna use greatstuff foam.
the stuff holds water and gets heavy and can damage your hull.

take pool noodles and cut them and glue them into place. they dont hold water. and are really light and bouyant.

chunk t · 04-07-2009, 09:25 PM

If the hull & deck are not joined or it's a scratch build project, I use wall insulation foam (blue or pink sheet) sanded to shape and glued in place. The pool noodles are my #2 choice.

roadrashracing · 10-16-2009, 11:06 AM

Bumping this thread, and is it ok to run battery packs that are assembled with battary bars?

chewiefttc4 · 10-16-2009, 11:23 AM

yup perfectly fine

jay m · Yesterday, 11:50 PM

Quote:

Originally Posted by chewiefttc4

That 3000 kv motor will work fine just the kvs a little on the high side.

didnt want to read that was thinking about puting my 3.5 turn 10,000kv brushless setup on 7.4volts in my 32 inch vee. might have to put the 1620kv it came with back in and run it on 6cells just still sounds to slow. any suggestions just want a really fast boat with out spending mega coin cheers

Bgun · Today, 06:37 AM

Quote:

Originally Posted by jay m

didnt want to read that was thinking about puting my 3.5 turn 10,000kv brushless setup on 7.4volts in my 32 inch vee. might have to put the 1620kv it came with back in and run it on 6cells just still sounds to slow. any suggestions just want a really fast boat with out spending mega coin cheers

at 6s that 1620KV motor will be turning at 35,964 rpm and a 2200 kv motor would be 48,840 rpm