flat6

iTrader: (365)

Im running a speed passion reventon pro esc combined with a reedy sonic 10.5 motor. Battery is a 5 run old speedzone 2s 5000mah 50c.

I have the LVC in the esc set to 3.4 vps. Im running a fully charged packed today and it cutoff very early compared to what I am used to. I hooked the battery into my charger and both cells were still at 3.6vps.

What would cause a premature cutoff like that? I then lowered my lvc cutoff to 3.2vps and it lasted about 1 minute longer and still cut out at 3.59 vps.

Any ideas? Bad battery? Esc issue?

Thank you

theblitzkidd

iTrader: (11)

It may be dead and the batt is reading the resting voltage, but under load it gets to the lvc

MarkA

iTrader: (21)

I run voltage cut at 3.0v/cell myself but it sounds like the battery is pretty weak and not holding up at all under load.

theblitzkidd

iTrader: (11)

Yeah, it may have a weak cell!

flat6

iTrader: (365)

Thanks guys.