d.k.vmatt

Im looking at getting a couple of these lipos.

http://www.hobbyking.com/hobbyking/s...Lipo_Pack.html

And was wondering what charger people recommend?

Thanks
Matthew

AreCee

iTrader: (1)

Simple, any good charger over 80watts would be fine for 1C charging. 80 Watts will get you up to almost 2C but not quite (10.8A) where 2C for that pack is 11.2A so a 100 Watt charger would be suitable.

Rockthecatbox21

iTrader: (19)

My dynamite passport ultra works great. Might look at the dynamite ultra force charger if you want a good amount of watts.

Grasschopper

iTrader: (54)

I've got this guy: http://www.hobbyking.com/hobbyking/s...r_400w_V2.html

And other than the fact that the #1 side fan is noisy it has been a very nice charger/discharger thus far. I also have a Duratrax Onyx 245 and I prefer the Turnigy charger because it has the ability to discharge Lipos to a set storage voltage. The Turnigy also can charge at a much higher rate than the Onyx if needed.

jayhawknavy02

iTrader: (2)

I have the Hitec X4 Plus charger and love it.