New LRP Flow Esc
#406
Tech Regular
Cheers for that. Can send mine off now for a replacement. Cheers.
#407
Has anyone had any problem with the LRP flow V1.4 runinning boosted and using LRP X12 motor?
Was running a LRP X12 10.5 on my Hobbywing ESC with no problems, then put it on my LRP flow. It ran ok but then 3 minutes in it began to stutter, then no power then all of a sudden lots of power.
Changed sensor cable and still didnt cure it. Also it is not the ESC as i put a Reedy Sonic 10.5 on it and its fine.
Any ideas?
Was running a LRP X12 10.5 on my Hobbywing ESC with no problems, then put it on my LRP flow. It ran ok but then 3 minutes in it began to stutter, then no power then all of a sudden lots of power.
Changed sensor cable and still didnt cure it. Also it is not the ESC as i put a Reedy Sonic 10.5 on it and its fine.
Any ideas?
I have the same problem with my flow. I still cant find the cure. anyone?
#408
Mine did the same thing once I started using savox 1251 but didn't do it with my Ko servos for some reason, I added a cap to the aux port on my Rx(glitchbuster) and it works fine..
For some reason it didn't do it until I changed from my reedy sonic to thunder power, maybe TP was drawing more amps or whatever to run who knows but it hasn't done it since
For some reason it didn't do it until I changed from my reedy sonic to thunder power, maybe TP was drawing more amps or whatever to run who knows but it hasn't done it since
#410
USB BRIDGE SPEC.2 WINDOWS 8
I can't get my usb bridge to work with my Laptop running window 8. Can anyone give me some help?
#412
I think its the driver
#413
Tech Adept
what gear ratio do you use with a 13.5t motor with boost on the flow esc
Last edited by peter.; 03-18-2013 at 10:14 AM.
#414
Tech Regular
#415
im using a Novak 13.5 ballistic motor with my flow. it is faster than with the Novak kinetic esc. I love it
#416
#419
Does any body know if you will feel the diffrence between the works and comption flow when running 13.5? I see it has a higher number of fets.
#420
Tech Adept