ORCA Team - VRITRA VX COMPETITON ESC
#571
Great VX update with the Ver 3.3 software! Fantastic overall performance, resulting in improved brakes and slightly cooler motor temps. Appreciate the support with this superb product!!!
#572
Tech Apprentice
#573
Thanks Keith
I had my settings on
Boost-36
Timing start - 10
Timing interval -3
Turbo timing - 58
Turbo interval -2
PWM- 8
FDR 6.27 with D3.5 , came of at 83deg C
This was with 2 long straights being +/- 45m - 55m
I will try your settings on the shorter track which will give me more bottom end if I'm not mistaken
I had my settings on
Boost-36
Timing start - 10
Timing interval -3
Turbo timing - 58
Turbo interval -2
PWM- 8
FDR 6.27 with D3.5 , came of at 83deg C
This was with 2 long straights being +/- 45m - 55m
I will try your settings on the shorter track which will give me more bottom end if I'm not mistaken
also double check the timing on the motor. some motor have a build in timing at 0. the overall timing on the motor should be between 5 and 10 deg.
otherwise it will over heat very quickly and less bottom end power
#574
Can anyone recommend a setup for LRP 4.5 on low-med asphalt small track?
Thanks
I was planning on running blinky with the punch at 4...
Thanks
I was planning on running blinky with the punch at 4...
#575
Tech Apprentice
The d3.5 has built in timing of 30deg. I had the motor on 10 which totals 40deg. I normally come off at 65-70 degC.
#577
EAMotorsports provided Ver 3.3 update, works fantastic. Sent you a "pm".
#578
where can i get this software vx 3.3 version?
#580
Team EAM
iTrader: (79)
John (DJG)
I have not heard of any of that happening with the speedo's. Ive been running them for a year and not had any issues. Ive had a couple people hit a wall really hard (Like end of the straight away head on) and the speedo quit all together but thats about it.
Did it work fine after you cut it off and back on?
EA
I have not heard of any of that happening with the speedo's. Ive been running them for a year and not had any issues. Ive had a couple people hit a wall really hard (Like end of the straight away head on) and the speedo quit all together but thats about it.
Did it work fine after you cut it off and back on?
EA
#582
Tech Apprentice
#585
One of my ORCA casing had cracked. I was wondering if it's possible to buy top and bottom casing for a little repair ?