ORCA Team - VRITRA VX COMPETITON ESC
#197
Tech Regular
Performance differences between V2.2 and V3 firmware
Those whom have tested both versions, your input/opinions would be greatly appreciated.
Any differences with the brakes?
Thanks.
Any differences with the brakes?
Thanks.
#198
v3?
I just looked at orcarc.com website for v3 download.
I must be blind as I don't see it anywhere.
So, what am I missing here?
Thanks,
Darrald
I must be blind as I don't see it anywhere.
So, what am I missing here?
Thanks,
Darrald
#199
Software
+1
#201
Tech Adept
V3 is available to download.
Awesome !
Awesome !
Last edited by mojo tom; 11-19-2012 at 05:18 PM.
#202
Tech Regular
V3 download
Guys:
I installed V3 firmware within the programmer card and the ESC today. Everything worked fine when installing the firmware within the programmer card, but when attempting to install the firmware within the ESC, I got an error message even though it the install seemed complete. The error message had something to do with asking me to plug in the ESC...somehow the connection was, allegedly, lost.
In any case, I unplugged the ESC and re-plugged it and the USB link software indicated that the firmware was indeed V3 and everything OK. I scrolled through all the menus and everything seems fine.
Question:
Has this been experienced before? Should I re-flash the firmware just in case? Can I re-flash it?
Appreciate everyone's support!!
I installed V3 firmware within the programmer card and the ESC today. Everything worked fine when installing the firmware within the programmer card, but when attempting to install the firmware within the ESC, I got an error message even though it the install seemed complete. The error message had something to do with asking me to plug in the ESC...somehow the connection was, allegedly, lost.
In any case, I unplugged the ESC and re-plugged it and the USB link software indicated that the firmware was indeed V3 and everything OK. I scrolled through all the menus and everything seems fine.
Question:
Has this been experienced before? Should I re-flash the firmware just in case? Can I re-flash it?
Appreciate everyone's support!!
#203
Tech Adept
Should be fine, just try it.
It will either work perfectly or just don't, no halfway.
Really like the new program card menus and functions, brakes seems smoother too, can't test much more at 3AM.
The setup guide available at OrcaRC.com is great too with good base setups for 5.5 to 17.5.
I'm happy, that's some great work.
It will either work perfectly or just don't, no halfway.
Really like the new program card menus and functions, brakes seems smoother too, can't test much more at 3AM.
The setup guide available at OrcaRC.com is great too with good base setups for 5.5 to 17.5.
I'm happy, that's some great work.
#204
Guys:
I installed V3 firmware within the programmer card and the ESC today. Everything worked fine when installing the firmware within the programmer card, but when attempting to install the firmware within the ESC, I got an error message even though it the install seemed complete. The error message had something to do with asking me to plug in the ESC...somehow the connection was, allegedly, lost.
In any case, I unplugged the ESC and re-plugged it and the USB link software indicated that the firmware was indeed V3 and everything OK. I scrolled through all the menus and everything seems fine.
Question:
Has this been experienced before? Should I re-flash the firmware just in case? Can I re-flash it?
Appreciate everyone's support!!
I installed V3 firmware within the programmer card and the ESC today. Everything worked fine when installing the firmware within the programmer card, but when attempting to install the firmware within the ESC, I got an error message even though it the install seemed complete. The error message had something to do with asking me to plug in the ESC...somehow the connection was, allegedly, lost.
In any case, I unplugged the ESC and re-plugged it and the USB link software indicated that the firmware was indeed V3 and everything OK. I scrolled through all the menus and everything seems fine.
Question:
Has this been experienced before? Should I re-flash the firmware just in case? Can I re-flash it?
Appreciate everyone's support!!
you can re-flash to the older version then again to the new version if you want to. it will not re-flash the same version.
also some new function on V3.0
you can read off the ESC after the run: max RPM, Lowest Voltage, and ESC temp
#205
Tech Regular
iTrader: (17)
Hi guys, need some help with this new esc, I just got 2 of the vx esc and am running them in both my Xray t4s 17.5 blinky(trinity d3.5 high torque) and the other is 17.5 boosted(d3.5 high speed) looking for some good settings, i race on carpet 70'x50' track. Thanks for any help guys
#206
Hi guys, need some help with this new esc, I just got 2 of the vx esc and am running them in both my Xray t4s 17.5 blinky(trinity d3.5 high torque) and the other is 17.5 boosted(d3.5 high speed) looking for some good settings, i race on carpet 70'x50' track. Thanks for any help guys
Punch 10
Drive Freq 8k
Brake Freq 700%
Drag brake 3%
Initial Brake 3%
Erik posted this over a month ago
Punch 10
Drive Freq 8K
Brake freq 700
drag brake 3%
Initial brake 3%
both the same, good place to start...
#207
Tech Regular
Thanks!
#208
Be running mine in Boosted 17.5 Friday night
Run the Arc R10, Orca 4500 shorty, Vx V3 and D3.5 17.5
Already have a Base setup and ill see how it goes
#210
Settings
10%
30
-1
0.02
54
-1
off
off
4k
8
8k
Fdr 6.4
Motor come of at 52c in the finals so there is room for some more adjustments