Tim3

iTrader: (1)

Man I just ordered one of these and there already giving trouble. Is there any place to even get these fixed.
Dang.....

CristianTabush

iTrader: (13)

Where did you purchase your ESC? What kind of trouble is it giving you?

Tim3

iTrader: (1)

its on its way from ebay. this thread is showing trouble from what im reading.

i can now ownly hope this isnt going to hapen.

ByteStream

iTrader: (2)

I really don't see trouble at all .. some user error issues, some questions on loading software or using the right software .. etc.

I would have recommended going through an authorized HobbyWing dealer like http://www.falconsekido.com, rather than eBay due to the possibility of getting a fake and also the customer support.

I hope it works out, it's a great ESC.

Tim3

iTrader: (1)

I will hope all will be well- thank you.

It will be going in an sc10 using a tekin 8.5 any addvice for gearing or program set up would be grate. sorry for the rant.

fatchickterian

iTrader: (12)

Hi I wonder if anyone have experienced this, every time I turn on my V3 the red led just keep on flashing, the esc functions normally but just don't look right, anyone knows why??

100% not low battery and temp cut off!!

mkiiina

iTrader: (71)

That's normal for blinky (no timing) mode.

grippgoat

iTrader: (8)

How much does this ESC actually weigh? No wires, or anything, just the ESC? All the specs I've seen on it say 93g, which just seems ridiculous to me.

-Mike

fatchickterian

iTrader: (12)

Cool thanks, love this ESC, it's way better than Novak!!

Yokomo_Ant3

iTrader: (29)

Hey Mike,

My 3.1 without wires is 50g (fan included)

kempower2000

Have used the esc 1 weekend now. Works great but for some reason the
data recordings are not complete anymore.

It does record esc temp, battery voltage and rpm, BUT motor temp is not measured anymore since the last 2 runs. In the beginning it did and it was a very handy feature...

Any idea?

ATXPro4

iTrader: (4)

Check that your sensor wire is plugged in fully and not damaged. If the wire that reads the temp sensor is off then you wont get any temp reading for the motor.

kempower2000

hmmm, I have thought about that, but, is it really possible that the sensor wire is damaged, but still runs fine without cogging?

hyujmn

iTrader: (27)

Definitely a possibility.

grippgoat

iTrader: (8)

Thanks.

-Mike