Hobbywing Xerun V3
#166
Tech Adept
Please provide some handy modifiable blank pdf setup sheet, something like xray did
#167
You can change the details of the car etc, then it will save a document with all the settings direct from the V3, in an easy readable sheet.
#169
Tech Adept
Hello,
Anyone know if the temperature security work with a gm pro ?
It s work with the gm esc, maybe same with the hw v3 ?
Thanks
Anyone know if the temperature security work with a gm pro ?
It s work with the gm esc, maybe same with the hw v3 ?
Thanks
#170
I run normally with a gm delta pro 7t (equivalent aprox. A 3.5t) and works very well.
King regards.
King regards.
#171
Tech Adept
#172
Tech Master
The older GM "pro" motors - with the more enclosed cans and sensor port coming out just under the bearing do not have temperature sensors.
The newer GM "pro" motors - with the more vented cans and sensor port vertical behind the solder tabs to have temperature sensors.
The newer GM "pro" motors - with the more vented cans and sensor port vertical behind the solder tabs to have temperature sensors.
#173
Tech Adept
#174
Tech Master
That is newer motor, they do have temp sensors in them.
#175
Tech Adept
I run the gm race 2012 motors (latest ones) with the hw v3 mine pics up motor temp fine, unless I turn thermal protection off then it does not give temp reading.
It measures very good too I had it coming off at 136 oc (not f) and the motor is an animal I can't kill it! It is a very quick combination too.
J
It measures very good too I had it coming off at 136 oc (not f) and the motor is an animal I can't kill it! It is a very quick combination too.
J
#176
Tech Adept
Thanks jampot,
I have to activate the thermal protection to see it with the 2in1 card
I have to activate the thermal protection to see it with the 2in1 card
#177
Tech Adept
I have to say yes as my one does not give a temp if its off so set 125 degrees's obviously I turned mine off in an attempt to find the limits of the motor then checking after the run with a temp gun! Yeah I could not blow it in 5 mins! The motors are insane!the speedo feels real good too I have it just set and leave it never play no need.
#178
R/C Tech Elite Member
iTrader: (1)
Being new to hobbywing i have a ?. If i choose not to take a laptop to the track, will i need 2 seperate program boxes if i want to run 2 seperate profiles? ie: i run 17.5 blinky, but would also like to get some practice time running boosted as well. i just didnt see when booting up the program box any way to just load a profile unless you change each setting. hope ya'll understand what i am trying to do..
#179
Tech Regular
iTrader: (8)
Being new to hobbywing i have a ?. If i choose not to take a laptop to the track, will i need 2 seperate program boxes if i want to run 2 seperate profiles? ie: i run 17.5 blinky, but would also like to get some practice time running boosted as well. i just didnt see when booting up the program box any way to just load a profile unless you change each setting. hope ya'll understand what i am trying to do..