Custom transmitter
#1
Custom transmitter
I am starting a project that I would like to make a custom radio transmitter for. I was at ConExpo a few weeks back and noticed a couple R/C skid steers (Bobcat had one, and some other company). I noticed that their transmitter was suspended from a strap and it looked like it was all contained in a electrical 'project' type box. Are there any 'kits' or the like to make a transmitter? I am imagining being able to have different kinds of input devices plug into the actual transmitter similar to how a servo or speed control plugs into a receiver.
#2
Arduino might be something worth pursuing, if you're handy with such things. A couple people have figured out how to interface arduino's with existing R/C systems, here is one where someone used the trainer input plug on an airplane radio to built a custom interface to arduino:
http://www.arduino.cc/cgi-bin/yabb2/...num=1193927390
Another thought would be to use arduino with the Xbee shield and do a fully custom transmitter / receiver pair, but the range on this wouldn't be all that great (100 ft, 300ft line of sight).
As far as a "Kit", I'm not sure one exists.
http://www.arduino.cc/cgi-bin/yabb2/...num=1193927390
Another thought would be to use arduino with the Xbee shield and do a fully custom transmitter / receiver pair, but the range on this wouldn't be all that great (100 ft, 300ft line of sight).
As far as a "Kit", I'm not sure one exists.
#3
found another intereesting link:
http://www.ianjohnston.com/content/index.php?option=com_content&view=article&id=32r oject-rc-joystick-tx&catid=3:hobbies&Itemid=8
http://www.ianjohnston.com/content/index.php?option=com_content&view=article&id=32r oject-rc-joystick-tx&catid=3:hobbies&Itemid=8
#4
That is badass! I would get lost in the coding tho