msave

iTrader: (23)

Ok, first off. I have a novak havok pro system with 13.5 ballistic. My son has been racing for a bit. We had this system in a xxxcr buggy with no problems at all.Got a new sc, pulled the system out and put it in sc.I have a dx3s with a s300 reciever. Associated 1313 servo. Everything was pulled from buggy and dropped in truck. Turn radio on, and motor spins, servo doesn't work. So I took servo wire and plugged into my other Havoc sport in our blitz. Servo workd great. So thought it might be reciever, switched recievers. Reciever worked. Went through all troubleshooting I could think of (Wires correct, batt charged, etc).So I rebound reciever, nothing. I unplugged servo, and when servo is plugged in, the green light on my sr300 goes dim, unplug gets bright.Tried to run one touch program again, nothing. All i get on my esc is solid green and red light. Can't be reciever or servo, interchanged they work. Do I have a problem with my esc? Or is their something I'm not doing right? It's driving me nuts!