kooter

My buggy quit the other day and I'm trying to figure out what happened. I can't get the LED on my RX to come on. I've tried two other RX's with the same results. My ESC turns on and beeps three times but thats it. I'm getting 6.5V between the black and red and 3.2v between the white and black. I can program the ESC with the card but still can't get the RX LED to come on.

Anyone have anything to try? I've tried binding and as I already said, multiple RX's but nothing is working. The ESC does not smell like burnt electronics.

Suggestions other than run something else or replace this one? I might get there eventually but I like to know what happened and make sure its an ESC issue.

burnineyes

iTrader: (17)

Try re-calibrating the ESC to the receiver.