CC BEC up in flames
#1
CC BEC up in flames
first time i turned it on
all i was doing was centering and putting the horn on my steering servo
the servo was making noise and then POOF BEC BBQ
this in on a tekno converted MBX6 buggy with mamba max pro and tekin 2050 sensored.
I have a 7955 on steering and an s9351 on throttle.
The BEC caught fire on the side where the inputs form the battery (4s) come in
Any idea waht caused this. I have another CC BEC but I dont wanna hook it up and try again if this same thing will happen
all i was doing was centering and putting the horn on my steering servo
the servo was making noise and then POOF BEC BBQ
this in on a tekno converted MBX6 buggy with mamba max pro and tekin 2050 sensored.
I have a 7955 on steering and an s9351 on throttle.
The BEC caught fire on the side where the inputs form the battery (4s) come in
Any idea waht caused this. I have another CC BEC but I dont wanna hook it up and try again if this same thing will happen
#2
Tech Fanatic
iTrader: (11)
First time i turned it on.
All I was doing was centering and putting the horn on my steering servo.
The servo was making noise and then POOF BEC BBQ
This in on a Tekno converted MBX6 buggy with Mamba Max Pro and Tekin 2050 sensored.
I have a 7955 on steering and an s9351 on throttle.
The BEC caught fire on the side where the inputs from the battery (4s) come in.
Any idea what caused this? I have another CC BEC but I dont wanna hook it up and try again if this same thing will happen.
All I was doing was centering and putting the horn on my steering servo.
The servo was making noise and then POOF BEC BBQ
This in on a Tekno converted MBX6 buggy with Mamba Max Pro and Tekin 2050 sensored.
I have a 7955 on steering and an s9351 on throttle.
The BEC caught fire on the side where the inputs from the battery (4s) come in.
Any idea what caused this? I have another CC BEC but I dont wanna hook it up and try again if this same thing will happen.
#4
Tech Lord
iTrader: (21)
You're lucky it was just the CC BEC, when I read this, I stopped using them and converted to the dimensioin engr BEC where I have to use one -
http://www.rc-monster.com/forum/show...C+bec+failures
http://www.rc-monster.com/forum/show...C+bec+failures