NEW HOBBYWING STOCK SUPERCHARGED SOFTWARE
#5686
Thanks ill stick with 211 then , as thats working great anyway ........
#5687
You really are feeling the pressure cutting edge! looking for every little bit of help! I really need a good result this weekend so will be going out with all guns blazing
#5688
213 is not in the latest v1.63 usb link software package. 211 is the latest in that package.
213 is again, like 101224 only released here on the internet, and then also only by replacing some files in the v1.63 folder on your pc. (Do you remember Angelo? )
I believe the only difference between 211 and 213, is when the turbo is released.
211 releases his turbo after all set boost timing is reached.
213 releases his turbo after the turbo delay, so actually like 119 does it.....
anyone knowing it better, please correct me if I am wrong.
213 is again, like 101224 only released here on the internet, and then also only by replacing some files in the v1.63 folder on your pc. (Do you remember Angelo? )
I believe the only difference between 211 and 213, is when the turbo is released.
211 releases his turbo after all set boost timing is reached.
213 releases his turbo after the turbo delay, so actually like 119 does it.....
anyone knowing it better, please correct me if I am wrong.
yes two files
car_esc_settings.db3
car_esc_version_control.ini
Last edited by COBRARACING; 07-22-2011 at 04:14 PM.
#5689
Tech Adept
Im a bit 'puter illiterate.Where can i find it then. Can someone give a link?
#5690
Umm FunkyDunky ( He sounds like he has fitted Guns to his Tamiya )
Do I know you ? you sound like a loony
#5691
For the rest of the folks out there follow the link below to find even more Hobbywing set ups for 21.5 and 13.5
http://www.stockracer.co.uk/
Its a work in progress so please be gentle
Thanks Cherry for the set up sheets they work like a dream!!
#5692
Great work guys
lots of setups,technical info and much much more .This Thread is the most informative and with the most user friendly environment on rc tech .
As alot of you know the other 3 share holders of hobbywing come in every so often into the thread just for a read and they are amazed with the info available and that everyone is helping eachother .
Jack said wow these guys know so much about our products sometimes even more then michael lol
Great work and keep it up .
regards Angelo
lots of setups,technical info and much much more .This Thread is the most informative and with the most user friendly environment on rc tech .
As alot of you know the other 3 share holders of hobbywing come in every so often into the thread just for a read and they are amazed with the info available and that everyone is helping eachother .
Jack said wow these guys know so much about our products sometimes even more then michael lol
Great work and keep it up .
regards Angelo
#5693
I haven't looked through the entire thread, but how many guys have run the Hobbywing in 1/12 17.5 "blinky" class??
Our local track runs 0 timing, so I picked one up to try it.
I went faster then other brand esc's I've tried so far......WOW!!
Our local track runs 0 timing, so I picked one up to try it.
I went faster then other brand esc's I've tried so far......WOW!!
#5694
213
hello guys
I did not think the site 213 hw this new version, could someone pass me the direct link?
so I found the 211 who have had no other
thanks
I did not think the site 213 hw this new version, could someone pass me the direct link?
so I found the 211 who have had no other
thanks
#5695
Tech Champion
iTrader: (2)
Will the Hobbywing 120A 1S ESC work with a brushed motor?
The manual for the 1S doesn't say anything about brushed, but the manual for the SD says it will work.
I want to recommend the ESC to a 12th racer who wants to start by using brushed motors.
-----
12th blinky 17.5 1S? I've been doing a little 17.5 boosted 12th, that's ok, once it winds out. The first time I put the car on the track, I hadn't dialed on any timing. I decided that was a bad idea after 2 minutes when I got sick of being punted out of the way by the plastic Tamiyas with the kit motors. I found it seriously slow.
The manual for the 1S doesn't say anything about brushed, but the manual for the SD says it will work.
I want to recommend the ESC to a 12th racer who wants to start by using brushed motors.
-----
12th blinky 17.5 1S? I've been doing a little 17.5 boosted 12th, that's ok, once it winds out. The first time I put the car on the track, I hadn't dialed on any timing. I decided that was a bad idea after 2 minutes when I got sick of being punted out of the way by the plastic Tamiyas with the kit motors. I found it seriously slow.
#5696
#5697
Harsh but fair! I am a looney tune!
For the rest of the folks out there follow the link below to find even more Hobbywing set ups for 21.5 and 13.5
http://www.stockracer.co.uk/
Its a work in progress so please be gentle
Thanks Cherry for the set up sheets they work like a dream!!
For the rest of the folks out there follow the link below to find even more Hobbywing set ups for 21.5 and 13.5
http://www.stockracer.co.uk/
Its a work in progress so please be gentle
Thanks Cherry for the set up sheets they work like a dream!!
for your info your links for your Southend set ups both point to the wet set up. Would be interested in your dry set up.