NEW HOBBYWING STOCK SUPERCHARGED SOFTWARE
#3961
Tech Addict
Again, still don't know why max RPM is useful.. as full boost will have been long added before then. But anyway, I've updated the speed chart to help a little.
Second tab, has a summary table of what speed should be achieved for a given rpm vs rollout (thereby removing gearing/tyres/etc from the equation). For 42kph, your rollout is going to need to be near 70mmpr if you think your only getting 11,000rpm.
HiH
Ed
Second tab, has a summary table of what speed should be achieved for a given rpm vs rollout (thereby removing gearing/tyres/etc from the equation). For 42kph, your rollout is going to need to be near 70mmpr if you think your only getting 11,000rpm.
HiH
Ed
Ed, looks good mate, will take a proper look when I get home from work, I did this as well at Maritime with a speed gun to get rpm going onto the straight to enable setting timing switchpoints on another speedo, but it's always interesting to learn about this stuff
Hope everything is good over there for you, shame you're not here for some WLRC action this year !
#3962
I do agree though this thread is starting to get full of muppits. If someone has gone out of there way to design some thing or post something useful on the forum and you dont want to use it why even comment ? Just dont use it.
#3963
Tech Rookie
Hi mate I didn't get to see the post you deleted but if it was the set up sheet I would like to use it if possible please.
I do agree though this thread is starting to get full of muppits. If someone has gone out of there way to design some thing or post something useful on the forum and you dont want to use it why even comment ? Just dont use it.
I do agree though this thread is starting to get full of muppits. If someone has gone out of there way to design some thing or post something useful on the forum and you dont want to use it why even comment ? Just dont use it.
#3964
Again, still don't know why max RPM is useful.. as full boost will have been long added before then. But anyway, I've updated the speed chart to help a little.
Second tab, has a summary table of what speed should be achieved for a given rpm vs rollout (thereby removing gearing/tyres/etc from the equation). For 42kph, your rollout is going to need to be near 70mmpr if you think your only getting 11,000rpm.
HiH
Ed
Second tab, has a summary table of what speed should be achieved for a given rpm vs rollout (thereby removing gearing/tyres/etc from the equation). For 42kph, your rollout is going to need to be near 70mmpr if you think your only getting 11,000rpm.
HiH
Ed
Max RPM is needed mainly because I want to keep my RPM under 45K. Novak warns against revving their motors above 50000 rpm as the rotor may explode. RUnning 1S this obviously isnt a problem, but when running 2S Mod motors, it would be nice to know.
Shawn.
Ps. My rollout is 85mm. :-)
#3965
Deleted
Last edited by cherry2blost; 03-24-2011 at 02:09 AM.
#3966
Again, still don't know why max RPM is useful.. as full boost will have been long added before then. But anyway, I've updated the speed chart to help a little.
Second tab, has a summary table of what speed should be achieved for a given rpm vs rollout (thereby removing gearing/tyres/etc from the equation). For 42kph, your rollout is going to need to be near 70mmpr if you think your only getting 11,000rpm.
HiH
Ed
Second tab, has a summary table of what speed should be achieved for a given rpm vs rollout (thereby removing gearing/tyres/etc from the equation). For 42kph, your rollout is going to need to be near 70mmpr if you think your only getting 11,000rpm.
HiH
Ed
#3967
Tech Apprentice
"like i said i like your Design!"
and never told you to delete your Link's
(but the images is too big)
i just, unhappy like you,
and wonder if those Setup Sheet is already on Hobbywing Interface,
Setting's like Yours i can do simply by pressing Alt+Printscreen
and paste it to my paint, and save it.
But i Prefer Hobbywing To improved their interface on their Export Settings
and add the Import Settings as well...
I Like Sharing Setting's but i Hate when i have to do it manually.
and the availability of Profile inside Firmware is wasted because every time i change firmware, all setting's change to factory default.
If we can Import The setting's of what We have been Export it,
Those Problem Solved, and We can share Easier.
#3968
deleted
Last edited by cherry2blost; 03-24-2011 at 02:09 AM. Reason: Tempering language
#3969
genuinely entertaining
#3970
Registered User
iTrader: (8)
hey guys spent all day setting up 211 and this is what i have ended up with.
After 5 min runs motor was coming in at 60c
Fdr 5.92 26tpinion,81t spur
boost timing-48
turbo slope-24
turbo timing-20
start rpm-4000
turbo delay-0.1sec
timing acc-350
drrs-2
A mate had his 4.5t out at same time and was really close on speed with it.
All i can say is gotta love the feel of 211
After 5 min runs motor was coming in at 60c
Fdr 5.92 26tpinion,81t spur
boost timing-48
turbo slope-24
turbo timing-20
start rpm-4000
turbo delay-0.1sec
timing acc-350
drrs-2
A mate had his 4.5t out at same time and was really close on speed with it.
All i can say is gotta love the feel of 211
#3971
Tech Apprentice
http://www.mediafire.com/?cgkkmr5fifdzw87
Setting Sheet TC V1.4 ^^
http://www.mediafire.com/?50y7w4xgpssi86b
Setting Sheet Pan Car V1.0 ^^
No S#@T sherlock!
No
Fine. Carry on doing that then.
Ask them then, send an email to
Mr. Yannick Yuan
E_Mail:
[email protected]
MSN:
[email protected]
Is it that much of a hardship?
Different firmware demands different settings
'nuff said
can be done by simply importing setting's.
and every time you release setting's we can simply importing.
Simple right..
and.. do you think Yannick will respond ?
what about angelo ? michael ?
#3972
deleted
Last edited by cherry2blost; 03-24-2011 at 02:09 AM.
#3973
Tech Apprentice
So you are sayin it's useless if i am using Xerun hobbywing ?
so i will stop using one ?
you cried, but you delete it. why
so i must use your setup sheet.
change setting's on the your setup sheet, and get's nothing changed on my firmware setting's ?
So... were just playing with your setup sheet right ?
and don't tell me if you have to do it manually to enter the LCD or pc interface setting's, because that's wasting time..
Oh you are right We do have Cherry Setup Sheet
Cheers
so i will stop using one ?
you cried, but you delete it. why
so i must use your setup sheet.
change setting's on the your setup sheet, and get's nothing changed on my firmware setting's ?
So... were just playing with your setup sheet right ?
and don't tell me if you have to do it manually to enter the LCD or pc interface setting's, because that's wasting time..
Oh you are right We do have Cherry Setup Sheet
Cheers
#3975
Max RPM is needed mainly because I want to keep my RPM under 45K. Novak warns against revving their motors above 50000 rpm as the rotor may explode. RUnning 1S this obviously isnt a problem, but when running 2S Mod motors, it would be nice to know.
Shawn.
Ps. My rollout is 85mm. :-)
Shawn.
Ps. My rollout is 85mm. :-)
Start RPM and which acceleration fit on track,
so we can really racing, instead Blind setting's.
1Scaled racing is always using Tacho on it's car.
10 Years in Brushless i drove blind car.