NEW HOBBYWING STOCK SUPERCHARGED SOFTWARE
#3706
Tech Rookie
Good, glad that's all settled then. Took a break from my own Drift web site to find it's just as fiery here.......
Okay, brand new to the forum and need some help. I have two drift cars I use for competition, one with Xtreme stock & new 13.5 HW motor, the other with Xtreme stock and Novak Ballistic 10.5. I'm looking for settings using ver119 but remember, drifting is not racing so I'll explain what (I think) I'm looking for.
We use poly' tyres (HPI T-Drifts) which are made of a material similar to plastic sink bowls so grip levels are LOW! When drifting, we look for pace, angle, line and smoothness through the judged drift course, so, given we are 'balancing' the cars in a drift around the course at about 1/3rd race speed we need a smooth power delivery without any sudden surges in power and a lot more wheel revolutions than speed over the tarmac/carpet is essential or the drift is lost.
It may be that dynamic (Boost) timing could do the job without turbo, so avoiding surges so long as the wheels are still spinning faster than road speed through long, fast sweepers, such as Snetterton's onto the start straight. With low grip, motors overheating due to gearing has not been a problem with 'conventional' esc's so low FDRs were traditionally used, as low as 3:1 but that's now maybe not necessary.
My other concern is that the HW can has 0 degrees and the Novak 30 degrees mechanical timing so I'm assuming the two profiles should be very different.
Any offerings, with any explanations would be very welcome.
Okay, brand new to the forum and need some help. I have two drift cars I use for competition, one with Xtreme stock & new 13.5 HW motor, the other with Xtreme stock and Novak Ballistic 10.5. I'm looking for settings using ver119 but remember, drifting is not racing so I'll explain what (I think) I'm looking for.
We use poly' tyres (HPI T-Drifts) which are made of a material similar to plastic sink bowls so grip levels are LOW! When drifting, we look for pace, angle, line and smoothness through the judged drift course, so, given we are 'balancing' the cars in a drift around the course at about 1/3rd race speed we need a smooth power delivery without any sudden surges in power and a lot more wheel revolutions than speed over the tarmac/carpet is essential or the drift is lost.
It may be that dynamic (Boost) timing could do the job without turbo, so avoiding surges so long as the wheels are still spinning faster than road speed through long, fast sweepers, such as Snetterton's onto the start straight. With low grip, motors overheating due to gearing has not been a problem with 'conventional' esc's so low FDRs were traditionally used, as low as 3:1 but that's now maybe not necessary.
My other concern is that the HW can has 0 degrees and the Novak 30 degrees mechanical timing so I'm assuming the two profiles should be very different.
Any offerings, with any explanations would be very welcome.
#3707
the pancar pdf workd fine.
#3708
hold my 110211
now V3.0_110125STOCK first.
now V3.0_110125STOCK first.
#3709
Some excellent news well done guys !!!
I was most impressed with the lil hottie in the bottom left side of the bottom pic :P
#3710
can anyone explain to me how to make the whole administrator thingy go away so i can update the lcd box?
#3711
Instead of double clicking the file, right click and hit troubleshoot compatability, it will then ask you to start the program, DO NOT click the close button, let the program install and THEN hit the close button, it will import the compatability settings into the start Icon and Voila all working !!!
#3712
right, it worked but when i want to update the lcd box i only have a choive in v 1.07_110119, 1224 and 512? before i had a choice in mod and stock?
i received a winrar with 2 files in it, is this correct?
PS
when going to the esc speed control i do see the 211 version but also 213?
i received a winrar with 2 files in it, is this correct?
PS
when going to the esc speed control i do see the 211 version but also 213?
#3713
right, it worked but when i want to update the lcd box i only have a choive in v 1.07_110119, 1224 and 512? before i had a choice in mod and stock?
i received a winrar with 2 files in it, is this correct?
PS
when going to the esc speed control i do see the 211 version but also 213?
i received a winrar with 2 files in it, is this correct?
PS
when going to the esc speed control i do see the 211 version but also 213?
YAY!!! The god of Ebay has answered my prayers, now have a car again WOOT !!!
Now does anybody fancy the remains of 2 Sakura Zero's, probably enough to 90% complete lol !!!!!
Last edited by cherry2blost; 03-09-2011 at 11:37 AM.
#3714
do you mean the original 2 files that were overwritten with the new files?
Hard to change the name when they have being overwritten?
Hard to change the name when they have being overwritten?
#3715
[QUOTE=cherry2blost;8772983I was most impressed with the lil hottie in the bottom left side of the bottom pic :P[/QUOTE]
+1
+1
#3716
Tech Apprentice
2wDrive,
Same happening for me! Loads onto the Speedo but not the programmer.
I did notice that whlist the LCD programmer still says 119 the boost settings go up to 64 so can only assume it is working.
Cherry,
Tried what you suggested but made no difference. 211 still does not come up as option on LCD Programmer!
Same happening for me! Loads onto the Speedo but not the programmer.
I did notice that whlist the LCD programmer still says 119 the boost settings go up to 64 so can only assume it is working.
Cherry,
Tried what you suggested but made no difference. 211 still does not come up as option on LCD Programmer!
#3717
yup same here, reinstalled the programm through the HW website and renamed teh 2 files and installed the new 211 files...nothing changed.
Mine goes to 64 as well but not the program box in the computer.
edit***
Now to my amazing i was looking for the adjustments in the programbox itself and the program box DOES go towards 64 degrees! When starting up without the computer attached, the box does say 211 version so i gues it did work although on the computer the version is still the old one for the program box?
Mine goes to 64 as well but not the program box in the computer.
edit***
Now to my amazing i was looking for the adjustments in the programbox itself and the program box DOES go towards 64 degrees! When starting up without the computer attached, the box does say 211 version so i gues it did work although on the computer the version is still the old one for the program box?
#3718
Tech Apprentice
Am confused now.
when connected to speedo only mine says 'Hobbywing V1.07-110119' when you press 'item' it says connecting to to esc version 211
Is that what you get ?
when connected to speedo only mine says 'Hobbywing V1.07-110119' when you press 'item' it says connecting to to esc version 211
Is that what you get ?
#3719
yup, got that as well
I gues it works as i can go up to 64 steps. Probably will never use 64 but it is nice i can if i want to lol
I gues it works as i can go up to 64 steps. Probably will never use 64 but it is nice i can if i want to lol
#3720
Tech Apprentice
Maybe I am missing something, but I've read through about 50 pages of this thread.
And I still can't tell what the latest released version of the software is.
I run 119 right now, but there seem to be at lest 4 other version numbers that are being thrown around.
So is the latest 119 or 211? Or What?
I ask because I really need some special awesome sauce for Saturday. I had to put a crumby motor in since my LRP X-12 13.5 burnt up .
And I still can't tell what the latest released version of the software is.
I run 119 right now, but there seem to be at lest 4 other version numbers that are being thrown around.
So is the latest 119 or 211? Or What?
I ask because I really need some special awesome sauce for Saturday. I had to put a crumby motor in since my LRP X-12 13.5 burnt up .