NEW HOBBYWING STOCK SUPERCHARGED SOFTWARE
#1456
For a moment i thought that HW has released a new software
#1457
I will double check tonight, and change my posts, just to avoid confusion....
#1458
Hi there, recently i just bought a HW XERUN 120A V2.1 esc. I tested today with 518stock software loaded.... I am using a 11.5T BL motor. With the 2 in 1 program card, i set the esc (as below stated). The punch is good, but the turbo is weak... Anyone could give some guide about it ???
F.D.R = 6.8
9 = 5
12 = 7
13 = 7
14 = 5
15 = 4
Thanks to those who willing to guide me....
F.D.R = 6.8
9 = 5
12 = 7
13 = 7
14 = 5
15 = 4
Thanks to those who willing to guide me....
#1460
Tech Adept
Hi CK Loo,
Thanks for support HW .....can i know what is the motor temp ? brand ? cos different brand they will have different character....different of ratio and which track normally you do practice....thanks if you still have any question please feel free to pm me ...and i hope we can share setup in future Cheers
DONT THINK TOO MUCH JUST DRIVE !!!!!!!!!!
Thanks for support HW .....can i know what is the motor temp ? brand ? cos different brand they will have different character....different of ratio and which track normally you do practice....thanks if you still have any question please feel free to pm me ...and i hope we can share setup in future Cheers
DONT THINK TOO MUCH JUST DRIVE !!!!!!!!!!
#1461
#1462
please send me an email [email protected]
we are supplying direct until the distributor is finalised in the usa
we are supplying direct until the distributor is finalised in the usa
#1463
At the moment there is no new software updates for 1/10th scale esc's current is the 518 stock,508 no timing and 528 mod .
The only new software is for the 80A and 150A for 1/8th scale and 1/5th scale .
The only new software is for the 80A and 150A for 1/8th scale and 1/5th scale .
#1464
#1465
Angelo,
Thanks for the advice...
Will try it out and feedback...
Hobbywing rocks!
#1466
Just wanted to briefly say that I have just installed 518STOCK using the boost settings and gearing for 13.5 with my SP v3 motor that are suggested in HW's pdf.
Ran at two race meetings, one on a 30x16m track, one on a 20x8m track, and lacked nothing in speed or driveability to the competition, with comfortable motor temperatures.
Credit to Hobbywing for the software and documentation.
Ran at two race meetings, one on a 30x16m track, one on a 20x8m track, and lacked nothing in speed or driveability to the competition, with comfortable motor temperatures.
Credit to Hobbywing for the software and documentation.
Last edited by sosidge; 10-21-2010 at 04:11 AM.
#1467
Tech Elite
iTrader: (5)
On setup help, I meant to post this some time ago, it's not my work, someone made all the info as posts ages ago, and I found the info helpful so put it into a doc and printed myself a copy to help my own setup.
Really for all those looking for setups, often what I found was just to follow the guides, try and figure out what everything does, and then work from there, it's not 'that' hard to do.
Really for all those looking for setups, often what I found was just to follow the guides, try and figure out what everything does, and then work from there, it's not 'that' hard to do.
#1468
Tech Elite
iTrader: (15)
On setup help, I meant to post this some time ago, it's not my work, someone made all the info as posts ages ago, and I found the info helpful so put it into a doc and printed myself a copy to help my own setup.
Really for all those looking for setups, often what I found was just to follow the guides, try and figure out what everything does, and then work from there, it's not 'that' hard to do.
Really for all those looking for setups, often what I found was just to follow the guides, try and figure out what everything does, and then work from there, it's not 'that' hard to do.
#1469
Just wanted to briefly say that I have just installed 518STOCK using the boost settings and gearing for 13.5 with my SP v3 motor that are suggested in HW's pdf.
Ran at two race meetings, one on a 30x16m track, one on a 20x8m track, and lacked nothing in speed or driveability to the competition, with comfortable motor temperatures.
Credit to Hobbywing for the software and documentation.
Ran at two race meetings, one on a 30x16m track, one on a 20x8m track, and lacked nothing in speed or driveability to the competition, with comfortable motor temperatures.
Credit to Hobbywing for the software and documentation.
#1470
Tech Addict
On setup help, I meant to post this some time ago, it's not my work, someone made all the info as posts ages ago, and I found the info helpful so put it into a doc and printed myself a copy to help my own setup.
Really for all those looking for setups, often what I found was just to follow the guides, try and figure out what everything does, and then work from there, it's not 'that' hard to do.
Really for all those looking for setups, often what I found was just to follow the guides, try and figure out what everything does, and then work from there, it's not 'that' hard to do.
Mike