NEW HOBBYWING STOCK SUPERCHARGED SOFTWARE
#9646
Shop Owner
iTrader: (1)
please send me an email i have a complete explanation pdf file that i can email you .
[email protected]
[email protected]
#9648
The way i have it, once you have upgraded you programing box to the latest firmware the only software that will read it is the V3.1 software, so use that
select device / lcd program box
go to firmware and select an older firmware and downgrade the program box
sorted out a box for a friend like this
select device / lcd program box
go to firmware and select an older firmware and downgrade the program box
sorted out a box for a friend like this
#9649
Tech Elite
iTrader: (14)
The way i have it, once you have upgraded you programing box to the latest firmware the only software that will read it is the V3.1 software, so use that
select device / lcd program box
go to firmware and select an older firmware and downgrade the program box
sorted out a box for a friend like this
select device / lcd program box
go to firmware and select an older firmware and downgrade the program box
sorted out a box for a friend like this
So i have question,since im stock with version 3.1, will i have issues with my 120 ver 2 & 2.1 using this version? Or do still need to use version 1.64 as previously adviced?
Btw Angelo, thanks for your very prompt reply and so sorry to disturb you.
You ate bu far the ace of support ever had thats why i live HW...
Thanks again and more power.
Rgds
Jun
#9650
Tried that. Ut it does. Ot allow me to downgrade from 3 to a lower version.
So i have question,since im stock with version 3.1, will i have issues with my 120 ver 2 & 2.1 using this version? Or do still need to use version 1.64 as previously adviced?
Btw Angelo, thanks for your very prompt reply and so sorry to disturb you.
You ate bu far the ace of support ever had thats why i live HW...
Thanks again and more power.
Rgds
Jun
So i have question,since im stock with version 3.1, will i have issues with my 120 ver 2 & 2.1 using this version? Or do still need to use version 1.64 as previously adviced?
Btw Angelo, thanks for your very prompt reply and so sorry to disturb you.
You ate bu far the ace of support ever had thats why i live HW...
Thanks again and more power.
Rgds
Jun
Once downgraded, we were able to adjust my friends v2 esc no problem, it was a SP but sure it applies to HW product too
#9651
Tried that. Ut it does. Ot allow me to downgrade from 3 to a lower version.
So i have question,since im stock with version 3.1, will i have issues with my 120 ver 2 & 2.1 using this version? Or do still need to use version 1.64 as previously adviced?
Btw Angelo, thanks for your very prompt reply and so sorry to disturb you.
You ate bu far the ace of support ever had thats why i live HW...
Thanks again and more power.
Rgds
Jun
So i have question,since im stock with version 3.1, will i have issues with my 120 ver 2 & 2.1 using this version? Or do still need to use version 1.64 as previously adviced?
Btw Angelo, thanks for your very prompt reply and so sorry to disturb you.
You ate bu far the ace of support ever had thats why i live HW...
Thanks again and more power.
Rgds
Jun
I have sent you an email
regards Angelo
#9652
Tech Adept
Hello
In the pass i have speedos from many brands like:
Tekin , Lrp , Nosram, Gm .
Now i have a Hobbywing V3 , great speedo .
For me Hobbywing have the best support to the drivers .
Keep the good work.
Best regards:
Pedro Silva
In the pass i have speedos from many brands like:
Tekin , Lrp , Nosram, Gm .
Now i have a Hobbywing V3 , great speedo .
For me Hobbywing have the best support to the drivers .
Keep the good work.
Best regards:
Pedro Silva
#9653
Tech Apprentice
iTrader: (1)
Hi Guys
Just to let you know we have moved on from the older usb link software like the 1.64v as we have seen quite a few copies around one being who have also named their zero timing software 508 a complete copy of hobbywing lol It's flattering though and amazing that they are a United states company .
Anyway please download 3.1v the new usb link from the hobbywing website http://www.hobbywing.com/product_show.asp?id=218 under Link called Detail scroll down and you will see the downloadable link the usb link now works for all esc's in the hobbywing range .
Have a fun racing guys and anything info or question please let us know .
We are also working on a new 2 in 1 programmer with more memory so both the v3 and 2.1v will work on a single box .The lcd programme box will be the same no changes only different mcu that will hold more memory .
Just to let you know we have moved on from the older usb link software like the 1.64v as we have seen quite a few copies around one being who have also named their zero timing software 508 a complete copy of hobbywing lol It's flattering though and amazing that they are a United states company .
Anyway please download 3.1v the new usb link from the hobbywing website http://www.hobbywing.com/product_show.asp?id=218 under Link called Detail scroll down and you will see the downloadable link the usb link now works for all esc's in the hobbywing range .
Have a fun racing guys and anything info or question please let us know .
We are also working on a new 2 in 1 programmer with more memory so both the v3 and 2.1v will work on a single box .The lcd programme box will be the same no changes only different mcu that will hold more memory .
I click on the download button but the download never starts, it shows a very small section of green in the download progress bar but never gets any further.
Is their an alternate method to get the latest database upgrades?
Whne I flash my ESC, the only version it has for stock is the V3.0_110930
I presume I would need the new database to get the latest firmware for my Exrun 60A V2.1 to run in the stock class?
#9654
Ok, so I upgraded to V3.1 USB Link and when I open it it tells me that their is a database upgrade.
I click on the download button but the download never starts, it shows a very small section of green in the download progress bar but never gets any further.
Is their an alternate method to get the latest database upgrades?
Whne I flash my ESC, the only version it has for stock is the V3.0_110930
I presume I would need the new database to get the latest firmware for my Exrun 60A V2.1 to run in the stock class?
I click on the download button but the download never starts, it shows a very small section of green in the download progress bar but never gets any further.
Is their an alternate method to get the latest database upgrades?
Whne I flash my ESC, the only version it has for stock is the V3.0_110930
I presume I would need the new database to get the latest firmware for my Exrun 60A V2.1 to run in the stock class?
The v3.1 usb link with the database works on all HW esc's but software on the database like 511 is only available for the V3 esc only will not work with the 2.1 or 2.0 etc the same way the 930 stock will not work on the V3 esc .So basically when you plug the esc to programmer and pc the only data base that will appear is the database for that partcular esc example 2.1v only the 930 and 508 etc will appear nothing else same as the v3 esc only the software for that esc will appear .
Let me know if you need any more help
regards Angelo
#9655
Ok, so I upgraded to V3.1 USB Link and when I open it it tells me that their is a database upgrade.
I click on the download button but the download never starts, it shows a very small section of green in the download progress bar but never gets any further.
Is their an alternate method to get the latest database upgrades?
Whne I flash my ESC, the only version it has for stock is the V3.0_110930
I presume I would need the new database to get the latest firmware for my Exrun 60A V2.1 to run in the stock class?
I click on the download button but the download never starts, it shows a very small section of green in the download progress bar but never gets any further.
Is their an alternate method to get the latest database upgrades?
Whne I flash my ESC, the only version it has for stock is the V3.0_110930
I presume I would need the new database to get the latest firmware for my Exrun 60A V2.1 to run in the stock class?
#9657
Tech Elite
iTrader: (2)
Hi Guys
Just to let you know we have moved on from the older usb link software like the 1.64v as we have seen quite a few copies around one being who have also named their zero timing software 508 a complete copy of hobbywing lol It's flattering though and amazing that they are a United states company .
Anyway please download 3.1v the new usb link from the hobbywing website http://www.hobbywing.com/product_show.asp?id=218 under Link called Detail scroll down and you will see the downloadable link the usb link now works for all esc's in the hobbywing range .
Have a fun racing guys and anything info or question please let us know .
We are also working on a new 2 in 1 programmer with more memory so both the v3 and 2.1v will work on a single box .The lcd programme box will be the same no changes only different mcu that will hold more memory .
Just to let you know we have moved on from the older usb link software like the 1.64v as we have seen quite a few copies around one being who have also named their zero timing software 508 a complete copy of hobbywing lol It's flattering though and amazing that they are a United states company .
Anyway please download 3.1v the new usb link from the hobbywing website http://www.hobbywing.com/product_show.asp?id=218 under Link called Detail scroll down and you will see the downloadable link the usb link now works for all esc's in the hobbywing range .
Have a fun racing guys and anything info or question please let us know .
We are also working on a new 2 in 1 programmer with more memory so both the v3 and 2.1v will work on a single box .The lcd programme box will be the same no changes only different mcu that will hold more memory .
Is there any advantages to upgrade to the 3.1 software in regards to blinky mode or just stick with 1.64?
Cheers
Rob.
#9658
NEW 2 IN 1 LCD BOX
We have tested the new 2 in 1 LCD program box , it can support both V2.1 and V3 speedo. Works more easier . Including a battery voltage check port to measure your packs, it can help you to know your battery status in some cases.
I think it will be available soon.
I think it will be available soon.