NEW HOBBYWING STOCK SUPERCHARGED SOFTWARE
#4907
Tech Initiate
Hobbywing 120a V2.1 esc supercharger firmaware for mod motors
Hi Guys wonder if anyone can help, just converted to the HW V2.1 120A esc from my SP GT2.0 Pro. The HW esc seems to have a little less punch but seems to run higher timing than my SP version even though both are running 205 mod firmware and 26deg timing. Running the same motor 4.5t X12 I have to run 1 pinion lower otherwise the motor gets to hot and the car is still accelerating at the end of the straight!
My questions are:
1) Can I use my SP usb programming box with the SP 1.35 software to program the esc ie 205, 422, 518 etc and is this as good or the same as the HW software?
2) Our BRCA National series runs at very large asphalt tracks with straights up to 70 meters long, what firmware, settings & gearing should I be running with a 4.5t X12 motor.
3) I tried running with the SP 422 firmware with the 4.5t X12 on default settings and the + & - wires came unsoldered from the esc within 2 laps.
(but it was very fast)
Sorry if I have missed any previous posts I could not seem to find any.
Paul
My questions are:
1) Can I use my SP usb programming box with the SP 1.35 software to program the esc ie 205, 422, 518 etc and is this as good or the same as the HW software?
2) Our BRCA National series runs at very large asphalt tracks with straights up to 70 meters long, what firmware, settings & gearing should I be running with a 4.5t X12 motor.
3) I tried running with the SP 422 firmware with the 4.5t X12 on default settings and the + & - wires came unsoldered from the esc within 2 laps.
(but it was very fast)
Sorry if I have missed any previous posts I could not seem to find any.
Paul
#4909
Tech Elite
iTrader: (15)
Hi Guys wonder if anyone can help, just converted to the HW V2.1 120A esc from my SP GT2.0 Pro. The HW esc seems to have a little less punch but seems to run higher timing than my SP version even though both are running 205 mod firmware and 26deg timing. Running the same motor 4.5t X12 I have to run 1 pinion lower otherwise the motor gets to hot and the car is still accelerating at the end of the straight!
My questions are:
1) Can I use my SP usb programming box with the SP 1.35 software to program the esc ie 205, 422, 518 etc and is this as good or the same as the HW software?
2) Our BRCA National series runs at very large asphalt tracks with straights up to 70 meters long, what firmware, settings & gearing should I be running with a 4.5t X12 motor.
3) I tried running with the SP 422 firmware with the 4.5t X12 on default settings and the + & - wires came unsoldered from the esc within 2 laps.
(but it was very fast)
Sorry if I have missed any previous posts I could not seem to find any.
Paul
My questions are:
1) Can I use my SP usb programming box with the SP 1.35 software to program the esc ie 205, 422, 518 etc and is this as good or the same as the HW software?
2) Our BRCA National series runs at very large asphalt tracks with straights up to 70 meters long, what firmware, settings & gearing should I be running with a 4.5t X12 motor.
3) I tried running with the SP 422 firmware with the 4.5t X12 on default settings and the + & - wires came unsoldered from the esc within 2 laps.
(but it was very fast)
Sorry if I have missed any previous posts I could not seem to find any.
Paul
#4910
Tech Regular
when will the bluetooth device be released?
i want it now!!!
i want it now!!!
#4911
#4912
nice, any pics would help greatly
#4913
#4914
while at it, Angelo, measure the footprint of the new ESC, please?
Hopefully it's smaller than the 120A?!
Hopefully it's smaller than the 120A?!
#4915
I just received a 60a Xerun from ebay.
I bougth it as a v2.0 but I received a v2.1. there are details that make think could be a fake:
* motor & battery wires are thinner than my prevoius xerun
* Battery and motor wires are in a mixed position ( A+B-C not ABC +-)
* Serial No. sticker it's white and not chrome like before
* Comes with a different capacitor bank. Only two with transparent shrink tube
It's genuine or a fake?
I bougth it as a v2.0 but I received a v2.1. there are details that make think could be a fake:
* motor & battery wires are thinner than my prevoius xerun
* Battery and motor wires are in a mixed position ( A+B-C not ABC +-)
* Serial No. sticker it's white and not chrome like before
* Comes with a different capacitor bank. Only two with transparent shrink tube
It's genuine or a fake?
#4916
Hi guys,
I have the HW 120A 1S on my TRF417, I run with a 10.5T SP V3, and I dont have any PC ("just" MAC) The default firmware is V2.0_100528Mod, wonder if I can use the turbo timing, because I dont see any effect on the track...
Any clue ? Set up ?
Thanks !
I have the HW 120A 1S on my TRF417, I run with a 10.5T SP V3, and I dont have any PC ("just" MAC) The default firmware is V2.0_100528Mod, wonder if I can use the turbo timing, because I dont see any effect on the track...
Any clue ? Set up ?
Thanks !
#4917
yes you can run the turbo with the mod528 on the 10.5T just you will not has as much timing as the stock firmware.
#4918
As of the end of this month hobbywing will have a electronic serial numbering system in place for security against fake goods .
It will be like an imei number like the ones you have on mobile phones these days and you will use this number once you purchase your new product and head to the hobbywing website and input this number on a special link and it will tell you if your product is geniune or an imatation products/fake .
we are determined to stamp out this fake none genuine activity as we have found 146 ebay sellers selling fake logo labelled hobbywing products .
we take this activity very serious you might say well hobbywing are a chinese company and they are the same like all the rest but i can tell you your wrong as 2 of the directors which include myself are westernised individuals and we do not tolerate this activity not today not ever .
It will be like an imei number like the ones you have on mobile phones these days and you will use this number once you purchase your new product and head to the hobbywing website and input this number on a special link and it will tell you if your product is geniune or an imatation products/fake .
we are determined to stamp out this fake none genuine activity as we have found 146 ebay sellers selling fake logo labelled hobbywing products .
we take this activity very serious you might say well hobbywing are a chinese company and they are the same like all the rest but i can tell you your wrong as 2 of the directors which include myself are westernised individuals and we do not tolerate this activity not today not ever .
#4919
Tech Regular
146??
would be great if you listed the shops that sells genuine hobbywing products!
i bought my xeruns from rc-fans 88 and rcmart
would be great if you listed the shops that sells genuine hobbywing products!
i bought my xeruns from rc-fans 88 and rcmart
#4920
Tech Initiate
211 software?
Hello,
I'm new to Hobbywing so this may well be easy to answer?
I have downloaded the latest software from the Hobbywing site (hobbywing_usb_link_setup_V1.63_110310.rar) and installed it on my laptop and then onto the 2 in 1 box but the latest software it shows is V1.07_110119, how do I get 211?
Hope you can help.
Cheers,
Nick
I'm new to Hobbywing so this may well be easy to answer?
I have downloaded the latest software from the Hobbywing site (hobbywing_usb_link_setup_V1.63_110310.rar) and installed it on my laptop and then onto the 2 in 1 box but the latest software it shows is V1.07_110119, how do I get 211?
Hope you can help.
Cheers,
Nick