R/C Tech Forums

Go Back   R/C Tech Forums > General Forums > Radio and Electronics

Reply
 
Thread Tools Search this Thread
Old 04-20-2011, 12:17 AM   #4786
Tech Regular
 
Join Date: Dec 2005
Location: england
Posts: 304
Default

Quote:
Originally Posted by cherry2blost View Post
More brakes, more power just seems better also seem to be more resistant to the current from the newer softwares (Don't Blow)

thanks ill order one today


Contact HW Customer Support, return it for a repair use the warranty card, should be simple not quick but certainly simple.
thanks , do u no the address as its not on the warranty card unless im blind.. also do u no wat it will cost ?

ps will u be at brooklands on the sat b4 the stcc ?
__________________
stcc ssb tires, ko ,gm motors, demon products lipos, hobbywing speedo
mwoods is offline   Reply With Quote
Old 04-20-2011, 02:30 AM   #4787
Tech Elite
 
blade072's Avatar
 
Join Date: Jul 2004
Location: Adelaide S.A
Posts: 2,670
Trader Rating: 98 (100%+)
Default

i would like to thank angelo for all his help and support over the past week...
i am one happy HOBBYWING owner....again!!!
__________________
David Randall

AWESOMATIX A800 ★ MUCHMORE ★ R1 WURKS ★
TEAM XRAY X116 ★ SANWA M12 ★ SILVERBACK ★
HOBBYWING ★ RCMAKER ★ VOLANTE RC ★
blade072 is offline   Reply With Quote
Old 04-20-2011, 04:30 AM   #4788
Tech Elite
 
COBRARACING's Avatar
 
Join Date: Nov 2007
Posts: 3,207
Default

Quote:
Originally Posted by mwoods View Post
thanks , do u no the address as its not on the warranty card unless im blind.. also do u no wat it will cost ?

ps will u be at brooklands on the sat b4 the stcc ?

Hobbywing Technology Co., Ltd
4th Floor, 3rd Building, KeLunTe Industrial Park, ShangLiLang, BuLan Road, LongGang District, ShenZhen, China

If you pay for the shipping there and back we will repair it free of charge .

Attention the package to Ms echo or ms carolyn

regards Angelo
__________________
Email : teamcobraracing@gmail.com or ae@hobbywing.com
Repair service Address
Hobbywing Technology Co., Ltd.
4th Floor, 3rd Building, KeLunTe Industrial Park, ShangLiLang, BuLan Road, LongGang District, ShenZhen, China
COBRARACING is offline   Reply With Quote
Old 04-20-2011, 04:32 AM   #4789
Tech Elite
 
COBRARACING's Avatar
 
Join Date: Nov 2007
Posts: 3,207
Default

Quote:
Originally Posted by blade072 View Post
i would like to thank angelo for all his help and support over the past week...
i am one happy HOBBYWING owner....again!!!
I guess you received your beutiful black xtreme stock today ?
__________________
Email : teamcobraracing@gmail.com or ae@hobbywing.com
Repair service Address
Hobbywing Technology Co., Ltd.
4th Floor, 3rd Building, KeLunTe Industrial Park, ShangLiLang, BuLan Road, LongGang District, ShenZhen, China
COBRARACING is offline   Reply With Quote
Old 04-20-2011, 04:37 AM   #4790
Tech Elite
 
blade072's Avatar
 
Join Date: Jul 2004
Location: Adelaide S.A
Posts: 2,670
Trader Rating: 98 (100%+)
Default

Quote:
Originally Posted by COBRARACING View Post
I guess you received your beutiful black xtreme stock today ?
yes i did mate....i checked the letterbox when the bins were put out and there she was....all in her express post bag glory!!! thanks again...
__________________
David Randall

AWESOMATIX A800 ★ MUCHMORE ★ R1 WURKS ★
TEAM XRAY X116 ★ SANWA M12 ★ SILVERBACK ★
HOBBYWING ★ RCMAKER ★ VOLANTE RC ★
blade072 is offline   Reply With Quote
Old 04-20-2011, 06:51 AM   #4791
Tech Elite
 
Tabushi's Avatar
 
Join Date: Feb 2003
Location: Chile - Southamerica
Posts: 3,029
Trader Rating: 1 (100%+)
Send a message via AIM to Tabushi Send a message via Yahoo to Tabushi
Default

Just wanted to share some hobbywing experience with you guys ... sadly race 2 weeks ago was suspended due to heavy rain, but saturday practices allowed me to test on track my 8.5 stock configuration ... great experience so far, 99% of the guys use tekin, novak, orion, etc ... and this XTREME STOCK + 8.5 from hobbywing was hanging up with all of them and even showed better torque all around, im very happy and will track test again this weekend ...

THANKS FOR ALL YOUR HELP ON THIS FORUM GUYS !!

cya !
__________________
Patricio "PATO" Concha

E-Mail : pato_concha@yahoo.com
Facebook : http://www.facebook.com/patoconcha
Whatsapp : +56 9 66165085
Tabushi is offline   Reply With Quote
Old 04-20-2011, 07:35 AM   #4792
Tech Master
R/C Tech Elite Subscriber
 
Join Date: Oct 2008
Location: Grand Portage, MN
Posts: 1,362
Trader Rating: 39 (100%+)
Default

I cannot wait for my 120A to come in. Looking forward to getting this thing up to snuff for 1/12th

Great thread
jdeadman is offline   Reply With Quote
Old 04-20-2011, 06:55 PM   #4793
Tech Addict
 
Join Date: Jan 2008
Posts: 706
Trader Rating: 6 (100%+)
Default

Quote:
Originally Posted by jdeadman View Post
I cannot wait for my 120A to come in. Looking forward to getting this thing up to snuff for 1/12th

Great thread
The 120A is excellent for 1/12. Get used to fellow racers asking "wheres your voltage booster? "

I should start posting some 13.5 Boosted WGT setups in acouple of weeks. We unfortunately havnt had the weather to get the bugs worked out of the car yet.

Shawn.
Shawn68z is offline   Reply With Quote
Old 04-20-2011, 07:41 PM   #4794
Tech Master
R/C Tech Elite Subscriber
 
Join Date: Oct 2008
Location: Grand Portage, MN
Posts: 1,362
Trader Rating: 39 (100%+)
Default

Quote:
Originally Posted by Shawn68z View Post
The 120A is excellent for 1/12. Get used to fellow racers asking "wheres your voltage booster? "

I should start posting some 13.5 Boosted WGT setups in acouple of weeks. We unfortunately havnt had the weather to get the bugs worked out of the car yet.

Shawn.
We are running on a 45x60 very technical track. The infield is all 180's. Lap times are about 8.8 to 9.5 for the fast guys. So I have been running my 12th on a SP 10.5 with about 5 degrees of mechanical timing and with a gtb. Non timing esc and I am great in the infield but the only part that I lack ofer the tekins is the straight. But there is a hard 90 after the straight that we need to slow down for.

So I am going to start really conservative with about .4 sec delay about 10 degrees of timing and no turbo



Is there a good way to get some more jam exiting a corner
jdeadman is offline   Reply With Quote
Old 04-20-2011, 10:08 PM   #4795
Tech Addict
 
Join Date: Jan 2008
Posts: 706
Trader Rating: 6 (100%+)
Default

Quote:
Originally Posted by jdeadman View Post
We are running on a 45x60 very technical track. The infield is all 180's. Lap times are about 8.8 to 9.5 for the fast guys. So I have been running my 12th on a SP 10.5 with about 5 degrees of mechanical timing and with a gtb. Non timing esc and I am great in the infield but the only part that I lack ofer the tekins is the straight. But there is a hard 90 after the straight that we need to slow down for.

So I am going to start really conservative with about .4 sec delay about 10 degrees of timing and no turbo



Is there a good way to get some more jam exiting a corner
I dont have experience running a 10.5 with this ESC, as our club runs 17.5 boosted.

Your best bet would be to find M7H's 13.5 setting, and work from there. Its probably closer to what you are going to need. Just change the rollout for a 10.5 motor.

You will quickly find how people setup the HW speedo to be very different from each other, I personally like alot of boost and very little turbo, where some guys have almost no boost, and then alot of turbo for the big straight.
Shawn68z is offline   Reply With Quote
Old 04-21-2011, 02:27 AM   #4796
Tech Adept
 
Join Date: May 2004
Location: Netherlands
Posts: 122
Default

I have a problem with my speedo... I have the 2.1 xerun 120a...

As I tested the car in the afternoon with half charged battery it was all working fine.
I come at the track, charged my pack, want to drive, no throttle...
It gives power to the servo but when i use the throttle it wont do nothing.
Now I tried to recalibrate it and it beeps a few times really fast with red lights.
Now I've read that it could be the battery.

I have 50c lrp 5900.
On the charger it says 8.40 volts, that should be fine isn't it?
Motor 13.5 speed passion, which works as we have swapped motors in different cars.

Also got some new intellect 60c, not used yet. Maybe I should try those?

Or is my speedo just broke? Only 2.5 days used
Geforcy is offline   Reply With Quote
Old 04-21-2011, 04:24 AM   #4797
Tech Elite
 
COBRARACING's Avatar
 
Join Date: Nov 2007
Posts: 3,207
Default

Quote:
Originally Posted by Geforcy View Post
I have a problem with my speedo... I have the 2.1 xerun 120a...

As I tested the car in the afternoon with half charged battery it was all working fine.
I come at the track, charged my pack, want to drive, no throttle...
It gives power to the servo but when i use the throttle it wont do nothing.
Now I tried to recalibrate it and it beeps a few times really fast with red lights.
Now I've read that it could be the battery.

I have 50c lrp 5900.
On the charger it says 8.40 volts, that should be fine isn't it?
Motor 13.5 speed passion, which works as we have swapped motors in different cars.

Also got some new intellect 60c, not used yet. Maybe I should try those?

Or is my speedo just broke? Only 2.5 days used
Your battery could have dropped a cell .Use a new pack and drop your lipo cut off of the esc to 3.0v .
__________________
Email : teamcobraracing@gmail.com or ae@hobbywing.com
Repair service Address
Hobbywing Technology Co., Ltd.
4th Floor, 3rd Building, KeLunTe Industrial Park, ShangLiLang, BuLan Road, LongGang District, ShenZhen, China
COBRARACING is offline   Reply With Quote
Old 04-21-2011, 04:29 AM   #4798
Tech Elite
 
COBRARACING's Avatar
 
Join Date: Nov 2007
Posts: 3,207
Default

Hi Guys

Just some info about alot of copied ezrun 35 amp and 60amp ecs's floating around on Ebay from hong kong sellers .

Your purchasing at your own risk from these ebay sellers from hong kong .

watch for clear switches,packaging serial numbers not matching your esc or your warranty card serial number .and very low pricing like $55 or $65 us for a 60 amp combo also hobbywing does not supply a 7.5T ezrun motor.5.5T and 8.5T are the only ones .Spelling mistakes are a big alarm bells on packaging, instructions,and product

so be careful

regards regards Angelo
__________________
Email : teamcobraracing@gmail.com or ae@hobbywing.com
Repair service Address
Hobbywing Technology Co., Ltd.
4th Floor, 3rd Building, KeLunTe Industrial Park, ShangLiLang, BuLan Road, LongGang District, ShenZhen, China

Last edited by COBRARACING; 04-21-2011 at 03:20 PM.
COBRARACING is offline   Reply With Quote
Old 04-21-2011, 05:14 AM   #4799
Tech Apprentice
 
Join Date: Nov 2003
Location: France
Posts: 86
Default

I would like to thank HobbyWing and Angelo for their great support!!!

Cheers,

Fabien.
__________________
*LAF Painting*
february is offline   Reply With Quote
Old 04-21-2011, 05:43 AM   #4800
Tech Fanatic
 
daleburr's Avatar
 
Join Date: May 2010
Location: Oxfordshire, UK
Posts: 776
Default

Quote:
Originally Posted by COBRARACING View Post
Hi Guys

Spelling mistakes are a big alram bell on packaging instructions,and product
lol, classic.
__________________
Team Xray
RC-Timing Software - http://www.rc-timing.com
Mercedes AMG F1 - http://www.mercedes-amg-f1.com/
daleburr is offline   Reply With Quote
Reply



Currently Active Users Viewing This Thread: 2 (0 members and 2 guests)
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off



All times are GMT -7. It is currently 10:48 PM.


Powered By: vBulletin v3.9.2.1
Privacy Policy | Terms of Use | Advertise Content © 2001-2011 RCTech.net

SEO by vBSEO 3.5.0