R/C Tech Forums

Go Back   R/C Tech Forums > General Forums > Radio and Electronics

Like Tree5Likes
Reply
 
Thread Tools Search this Thread
Old 03-09-2011, 02:25 AM   #3691
M7H
Tech Elite
 
M7H's Avatar
 
Join Date: Dec 2004
Location: The Netherlands
Posts: 2,193
Default

Quote:
Originally Posted by sizheng View Post
But drivers like M7H found it very good for his driving, so just keep it and wait for the better one comes out.)
And I will!
Maybe I will try the 110211 tonight (thanks Angelo!) but I have the feeling it will not outperform 101224...

Quote:
Originally Posted by Shawn68z View Post
Maybe HW could put a safety into the software that would make sure it turned off if the input voltage is OVER 4.3V ? This would prevent people from trying to run a high timing in their 2S Touring Cars.
Then I can not charge my lipo's to 4.4V anymore....

Quote:
Originally Posted by sizheng View Post
Thanks Shawn.

We will do more test under 1S situation.
Actually the motor performance and efficiency under 1S is different from
higher voltage. I think this is the reason it needs different settings (maybe also different method )for boost and turbo.
Please do some 1S testing, to see what Shawn and I mean!...
Also try the 101224 then ofcourse!...
But keep in mind, my settings work really good with an LRP X12 motor, but not on a LRP X11....
Don't ask me why, maybe you can do something with that information....
Maybe you can bring out a firmware dedicated for 1S...




Quote:
Originally Posted by hacker View Post
instead of using 64 steps, I think it would be easier for the majority of people to understand using 100 steps or 100% boost timing.
Quote:
Originally Posted by COBRARACING View Post
Great idea makes sense.
Certainly a great idea!
Sometimes it's so simple...
Only don't make it 100 steps, because then you keep on pushing buttons, if you want to go down in a setting.
Lets change 2% at a time (to save memory in the speedo)...
__________________
Serpent
M7H is offline   Reply With Quote
Old 03-09-2011, 03:23 AM   #3692
Tech Addict
 
cherry2blost's Avatar
 
Join Date: Jan 2003
Location: London
Posts: 713
Trader Rating: 1 (100%+)
Default

Quote:
Originally Posted by 2wdrive View Post
could you place FDR / RO (rollout for the pancar guys) on the setup sheet?

just knitpicking

ps:
Maybe also 1s or 2s?
That's what the notes section is, in part, for to allow tou to add different notes. Didn't want it to be too cluttered as in the old days, K.I.S.S
__________________
Tamiya TA05 Ver II, Hobbywing 13.5T, KO PROPO PDS-2501 ICS, Eagle Racing 6000 65C LiPo, Hobbywing XTREME STOCK 518/213) Sanwa/Airtronics MT4 2.4G Radio.
www.racersinexile.org.uk | 'Official Certified' UK/Euro Importer for the Hobbywing XERUN Series Equipment We ship the world !!!| Quote code 'cherry' for 10% discount on our Web Store.
cherry2blost is offline   Reply With Quote
Old 03-09-2011, 04:49 AM   #3693
Tech Addict
 
Join Date: Dec 2009
Posts: 720
Default

Quote:
Originally Posted by COBRARACING View Post
Irgo it seems there is alot of bickering going on and this forum is for people who own hobbywings or want to purchase hobbywings information thread it is not for you or anyone else to have a battle .If you want to battle especially about rediculous childish stuff please leave the thread and when your ready to return and make an effort to the thread instead of argueing please let us know or the other outcome will be i ask the administrator to shut the whole thread down and customers can get in contact with me by email .

its up to you now .

regards Angelo
hi angelo... just my thought... i think we should retune our mind how to convert IRGO post from sarcastic/arguement to good suggestion/share/theory/finding... dont really know how do he get those data, somehow his points are relevant and good to us to study back... every post which reply his post will become good gathered knowledge in this thread to become revision to everybody not only for HW community...

thanc
zamrioo2 is offline   Reply With Quote
Old 03-09-2011, 05:10 AM   #3694
Tech Apprentice
 
Join Date: Feb 2010
Location: Sweden
Posts: 93
Default

Quote:
Originally Posted by hacker View Post
instead of using 64 steps, I think it would be easier for the majority of people to understand using 100 steps or 100% boost timing.

I still don't see the benefit of going from real measurable degrees of timing to some arbitary "steps" or % of timing.

Percent of what???
Nobody even seems to know how many actual degrees of timing the new softwares really has

Who needs a finer adjustment of timing than 1degree? If anybody would it's only to go to 0.5degrees.

As i have a Ballistic wich is fortunately marked in REAL degrees and have choosen to run firmware 1224 wich is also divided in REAL degrees, I can choose to remove/add a certain amount of timing on the endbell and simply add/remove that same amount in the speedcontroller in the same universal DEGREES!!!

Anyting other than actual degrees is plain stupid. IMO.

/Mattias
snabbgas is offline   Reply With Quote
Old 03-09-2011, 05:12 AM   #3695
Tech Addict
 
Born2Run's Avatar
 
Join Date: Jul 2007
Location: Europe
Posts: 740
Default

Quote:
Originally Posted by shano83 View Post
Hey cherry looks good to me good job mate Now post the download link
Come on Cherry,give us the link.Please.
__________________
Whatever
Born2Run is offline   Reply With Quote
Old 03-09-2011, 05:15 AM   #3696
Tech Apprentice
 
Join Date: Feb 2010
Location: Sweden
Posts: 93
Default

+1

Hopefully i can run it on my Android phone
snabbgas is offline   Reply With Quote
Old 03-09-2011, 05:19 AM   #3697
Tech Regular
 
JRXS_chris's Avatar
 
Join Date: Aug 2005
Location: Manchester, England
Posts: 386
Default

Quote:
Originally Posted by snabbgas View Post
+1

Hopefully i can run it on my Android phone
+2

Surely someone can program the LCD box functions into an App
JRXS_chris is offline   Reply With Quote
Old 03-09-2011, 05:29 AM   #3698
Tech Master
 
2wdrive's Avatar
 
Join Date: Mar 2009
Location: The Netherlands
Posts: 1,316
Default

Quote:
Originally Posted by cherry2blost View Post
That's what the notes section is, in part, for to allow tou to add different notes. Didn't want it to be too cluttered as in the old days, K.I.S.S
i know all about KISS, that is why i run a 235mm pancar (2s lipo) and not some over designed TC wich are still not on par with a 30 year old design (let the flaming begin! )

The TC got a nice box to put their FDR in and we have to put our rollout somewhere in the notes section?. You can add / RO behind the letters FDR ? so the box is for both FDR and ROllout
2wdrive is offline   Reply With Quote
Old 03-09-2011, 05:30 AM   #3699
Tech Fanatic
 
irgo's Avatar
 
Join Date: Apr 2006
Posts: 893
Default

Quote:
Originally Posted by nietzbatik View Post
Anyone know the ESC setting for 11.5T that team Hobbywing used to Win in TITC 2011? i have race on sunday, i hope i can use that seting for my race (i use HW Xerun 120A V2.1 and HW 11.5T motor)

Thanks
well too bad yesterday got rain nietz, so race was canceled.
__________________
Quark Force
irgo is offline   Reply With Quote
Old 03-09-2011, 06:08 AM   #3700
Tech Elite
 
COBRARACING's Avatar
 
Join Date: Nov 2007
Posts: 3,302
Default

Quote:
Originally Posted by zamrioo2 View Post
hi angelo... just my thought... i think we should retune our mind how to convert IRGO post from sarcastic/arguement to good suggestion/share/theory/finding... dont really know how do he get those data, somehow his points are relevant and good to us to study back... every post which reply his post will become good gathered knowledge in this thread to become revision to everybody not only for HW community...

thanc


I dont think irgo or cherry are bad guys i think they are both great people i just think it's more of a clash of different cultures,ego and personalities thats all and im sure it will all be good in the end .

Here we are one family not individuals and thats what others dont like and what i mean by that other manufacturers etc .
__________________
Email : teamcobraracing@gmail.com or ae@hobbywing.com
Repair service Address
Hobbywing Technology Co., Ltd.
4th Floor, 3rd Building, KeLunTe Industrial Park, ShangLiLang, BuLan Road, LongGang District, ShenZhen, China
COBRARACING is offline   Reply With Quote
Old 03-09-2011, 06:37 AM   #3701
Tech Addict
 
cherry2blost's Avatar
 
Join Date: Jan 2003
Location: London
Posts: 713
Trader Rating: 1 (100%+)
Default

Deleted
__________________
Tamiya TA05 Ver II, Hobbywing 13.5T, KO PROPO PDS-2501 ICS, Eagle Racing 6000 65C LiPo, Hobbywing XTREME STOCK 518/213) Sanwa/Airtronics MT4 2.4G Radio.
www.racersinexile.org.uk | 'Official Certified' UK/Euro Importer for the Hobbywing XERUN Series Equipment We ship the world !!!| Quote code 'cherry' for 10% discount on our Web Store.

Last edited by cherry2blost; 03-15-2011 at 04:53 AM.
cherry2blost is offline   Reply With Quote
Old 03-09-2011, 06:45 AM   #3702
Tech Elite
 
Join Date: Jan 2009
Posts: 2,037
Trader Rating: 10 (100%+)
Default

yay!!
cheapskate.brok is offline   Reply With Quote
Old 03-09-2011, 06:55 AM   #3703
Tech Elite
 
hacker's Avatar
 
Join Date: Mar 2009
Location: Vic, Australia
Posts: 3,129
Trader Rating: 140 (100%+)
Default

Quote:
Originally Posted by snabbgas View Post
I still don't see the benefit of going from real measurable degrees of timing to some arbitary "steps" or % of timing.

Percent of what???
Nobody even seems to know how many actual degrees of timing the new softwares really has

Who needs a finer adjustment of timing than 1degree? If anybody would it's only to go to 0.5degrees.

As i have a Ballistic wich is fortunately marked in REAL degrees and have choosen to run firmware 1224 wich is also divided in REAL degrees, I can choose to remove/add a certain amount of timing on the endbell and simply add/remove that same amount in the speedcontroller in the same universal DEGREES!!!

Anyting other than actual degrees is plain stupid. IMO.

/Mattias
couldn't care less if its in steps or degrees, 0-64 or 0-100, colors of the rainbow, alphabet A-Z......doesn't matter!

at the end of the day, + is more and = is less, that's all I need to know.

need more power>add more timing
motor overheating<less timing
hacker is offline   Reply With Quote
Old 03-09-2011, 06:56 AM   #3704
Tech Fanatic
 
daleburr's Avatar
 
Join Date: May 2010
Location: Oxfordshire, UK
Posts: 841
Default

Quote:
Originally Posted by snabbgas View Post
I still don't see the benefit of going from real measurable degrees of timing to some arbitary "steps" or % of timing.

Percent of what???
Nobody even seems to know how many actual degrees of timing the new softwares really has

Who needs a finer adjustment of timing than 1degree? If anybody would it's only to go to 0.5degrees.

As i have a Ballistic wich is fortunately marked in REAL degrees and have choosen to run firmware 1224 wich is also divided in REAL degrees, I can choose to remove/add a certain amount of timing on the endbell and simply add/remove that same amount in the speedcontroller in the same universal DEGREES!!!

Anyting other than actual degrees is plain stupid. IMO.

/Mattias
+1

Go back to degrees, please! All this arguing only started post FW518.
__________________
Team Xray
RC-Timing Software - http://www.rc-timing.com
Mercedes AMG F1 - http://www.mercedes-amg-f1.com/
daleburr is offline   Reply With Quote
Old 03-09-2011, 07:08 AM   #3705
Tech Elite
 
hacker's Avatar
 
Join Date: Mar 2009
Location: Vic, Australia
Posts: 3,129
Trader Rating: 140 (100%+)
Default

Quote:
Originally Posted by cherry2blost View Post
Group HUG !!!!!

removed pics to save space

http://www.mediafire.com/?50y7w4xgpssi86b

PAN ^^^^^

http://www.mediafire.com/?cgkkmr5fifdzw87

TC ^^^^

Cherry
xx
how do I save an edited pdf, as on mine it says I cannot save an edited pdf?

at the moment I have to use a 'screen capture program' and save as jpg.
hacker is offline   Reply With Quote
Reply



Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off



All times are GMT -7. It is currently 04:37 PM.


Powered By: vBulletin v3.9.2.1
Privacy Policy | Terms of Use | Advertise Content © 2001-2011 RCTech.net