NEW HOBBYWING STOCK SUPERCHARGED SOFTWARE
#2446
Tech Initiate
#2447
Tech Adept
iTrader: (11)
Bullistorm is not a hobbywing brand ,Hobbywing designs there own motors through michael and my input and they are made by hobbywing's family company a relation .Our motors are not made by fiago or anyone else .Michael needed motors that would suit the hobbywing esc's so they had to be 100% quality .
Most Oem products we do are by customer requirements they want quality they need to pay for it they want cheap thats what they will get and usually all our oem brands source there own motors they are not from hobbywing .
just some info for you guys to understand.
If a brand is telling you they are hobbywing oem esc's or motors please send me a photo and ill let you know as most who want cheap and narsty head over to other manufacturers in Asia and claim the product is hobbywing as thats were they first started there oem brand but trust me they are not hobbywing at all just use the reference hobbywing based which is untrue .
Most Oem products we do are by customer requirements they want quality they need to pay for it they want cheap thats what they will get and usually all our oem brands source there own motors they are not from hobbywing .
just some info for you guys to understand.
If a brand is telling you they are hobbywing oem esc's or motors please send me a photo and ill let you know as most who want cheap and narsty head over to other manufacturers in Asia and claim the product is hobbywing as thats were they first started there oem brand but trust me they are not hobbywing at all just use the reference hobbywing based which is untrue .
#2448
Anyone acknowledging the issue with the new software not being able to use your laptop or computer to setup and save your esc setting?
Thanks
Tom
Thanks
Tom
#2449
What I did have a problem with was calibrating the speedo to my TX when loaded with 1224. I had to reload 518 to do it.
Last edited by getpip; 01-19-2011 at 02:03 AM.
#2450
Tech Master
iTrader: (11)
Hope yall can help, can't find anyone in offroad section discussing.hobbywing 1/10. just bought a new 120a (v2.1 i think) and 6.5 motor, lcd programmer. instructions say default timing is 15 deg. is this dynamic timing? Seems like a lot if it's static timing. Also, one part of instructions says timing advance only works with sensorless, while another says it works for sensored and sensorless. which is it? Been raining.so no track time yet, but ran it hard in parking lot for 7 minutes yesterday. motor temp was 155, speedo was cool, ran like a scalded dog.
#2451
Excuse my laziness please guys but there is a LOT of info to wade through in this thread.
Quick question please are these software updates working on the XeRun 150a Esc?
Quick question please are these software updates working on the XeRun 150a Esc?
#2452
Tech Regular
Me too, also would like the possiblity to adjust the boost and turbo with a pc for the 1224.
Doesn`t work for you, 1224 and 110108 cant be programmed with the pc, only the 2 in 1...the 518 can be done with pc.
#2453
1/12 with 1s Lipo, 1/10 with 2s Lipo....
The default settings are a good starting point (maybe change settings like brake, lipo cut-off, etc. to your likings), and you will have the same performance with the default 1224 setting as with the 518 fully open!
#2454
My apologies if it sounded like i was having a go at Hobbywing ... the origin of the Bullistorm motor was purely based on "some bloke told me" .. not based in fact. I am a big supporter of the Hobbywing ESC's, as bang per buck they have no competitor's in my opinion. Keep up the great work.
Ill give you an example i had an American send me an email telling me that in the usa alot of racers think Hobbywing is just a knock off of American esc's which he is very misinformed if only he knew the truth that hobbywing is a innovator and not a ponzi who copies products .
All is good just race and be happy thats all .
#2455
No the software wont work with the xerun 150 at the moment but soon we will have a release for the 150 amp and 80amp.
#2456
Tech Adept
I connect my esc to my PC through the 2 in 1 and that is where I adjust and save through the PC. Out at the track, I only plug the esc into the 2 in 1 and adjust and save from there. That is why I sold off my GM and got the Hobbywing. I do not wish to bring out a laptop just to adjust some settings.
Is there a way to connect the esc direct to the PC without the 2 in 1???
#2457
#2458
Additional instruction 1224STOCK firmware.pdf
"1. Once the new firmware has been loaded into the ESC, you can only use the LCD Program Box or PC
software to set the programmable parameters, neither the LED Program Card nor the SET button is
available for programming the ESC with this new firmware."
"1. Once the new firmware has been loaded into the ESC, you can only use the LCD Program Box or PC
software to set the programmable parameters, neither the LED Program Card nor the SET button is
available for programming the ESC with this new firmware."
Last edited by getpip; 01-19-2011 at 02:17 AM.
#2459
Tech Initiate
Seen your question, but what car?
1/12 with 1s Lipo, 1/10 with 2s Lipo....
The default settings are a good starting point (maybe change settings like brake, lipo cut-off, etc. to your likings), and you will have the same performance with the default 1224 setting as with the 518 fully open!
1/12 with 1s Lipo, 1/10 with 2s Lipo....
The default settings are a good starting point (maybe change settings like brake, lipo cut-off, etc. to your likings), and you will have the same performance with the default 1224 setting as with the 518 fully open!
Hi,
Sorry I will be Running Xray T3'11, 2s Lipo, FDR usually around 7
at Ardent Raceway