problems with swallow charger and equinox balancer
#1
problems with swallow charger and equinox balancer
I have purchased a swallow 2 charger and a equinox balancer for my lipo's 11.1 batt x2 the first batt i charged without problems i used it for about 10 min when i wanted to recharge the balancer error led came on and at the same time it showed one cell precence i left it on charge +- 4.5 hrs i plugged it onto the heli ESC nothing happened "0" i put it back on charge thinking it might not be fully charged, for the night +- 8.5 hrs i plugged it back on the heli ESC the rx light came on once then died, i took the lipo to work and had the electrician check the batt, the reading was 4.1v flat as a pancake.
that is my ?
1.Is there a posibility that my charger is not working.
, although it shows lipo charge at 11.1v at 2.200.mah.
2. Could it be my balancer.
3.Could it be my step down unit 220v to 7.5v there is enough amps more than 5amps.
4. Please help
that is my ?
1.Is there a posibility that my charger is not working.
, although it shows lipo charge at 11.1v at 2.200.mah.
2. Could it be my balancer.
3.Could it be my step down unit 220v to 7.5v there is enough amps more than 5amps.
4. Please help