Integy 16x9V6 Problems and Lipo
#1
Integy 16x9V6 Problems and Lipo
I have an integy 16x9v6 that I got used and it has never really charged that well. I am not so sure but I have always been told it reads low when charging batteries but that seems weird to me....It also makes my batteries get super hot even when charging NiMH matched packs at 3-4 amps? Can this charger charge lipos as well? Judging by how it charges normal packs I am worried about lipo....
#2
Tech Lord
iTrader: (21)
Don't think it will do lipo - the 1st pg of the manual says NiCd and NiMH. Seven page manual located here - about halfway down list.
http://www.integy.com/cgi-bin/webc.c...tructions.html
I've no experieince with your charger, but if its getting you NiMHs hotter than you can hold, its damaging them. They shouldn't be peaking at more than 130-135F. Mine peak in upper 120s, low 130s charging at 5a (4000mah and 4400mah pacs).
http://www.integy.com/cgi-bin/webc.c...tructions.html
I've no experieince with your charger, but if its getting you NiMHs hotter than you can hold, its damaging them. They shouldn't be peaking at more than 130-135F. Mine peak in upper 120s, low 130s charging at 5a (4000mah and 4400mah pacs).