R/C Tech Forums

Go Back   R/C Tech Forums > General Forums > Radio and Electronics

Reply
 
Thread Tools Search this Thread
Old 08-23-2008, 06:52 AM   #1
Tech Champion
 
RC MARKET's Avatar
 
Join Date: Feb 2007
Location: HK
Posts: 6,167
Trader Rating: 12 (100%+)
Default SANWA M11S 2.4G Limited

SANWA
M11S 2.4G Limited ( faster 30% )

- Switch liquid crystal of two large-scale dot matrix liquid crystal CMF display * colors backlight LED * Raundosticc
- Stick tension adjuster 30 model of * key assign function * memory * vibrator function
- TWEAK function * Ecsponenshal * adjustable rate control * anti lock brake
- Traction control * throttle holding * Brakimishing * C-MIX * servo monitor
- Direct servo control * key lock function

Package including :
M11S Transmitter x1
TM-221DA 2.4GHz RF Module x1
RX-442DS 2.4GHz Receiver x1
TX-Battery x1
CHARGER X1
DSC CABLE X1


http://rcmarket.com.hk/product_info....oducts_id=4540
Attached Thumbnails
SANWA M11S 2.4G Limited-m11s_02.jpg   SANWA M11S 2.4G Limited-m11s_01.gif  

Last edited by RC MARKET; 08-23-2008 at 12:02 PM.
RC MARKET is offline   Reply With Quote
Old 08-26-2008, 01:25 AM   #2
Tech Apprentice
 
Join Date: Nov 2004
Posts: 96
Default

Engrish?

i was under the impression that it was a Euro / Jap relese only with sanwa... saw it a while back at some TC race
mwry13 is offline   Reply With Quote
Old 08-28-2008, 01:12 PM   #3
Tech Champion
 
RC MARKET's Avatar
 
Join Date: Feb 2007
Location: HK
Posts: 6,167
Trader Rating: 12 (100%+)
Default

back in stock !
RC MARKET is offline   Reply With Quote
Old 09-03-2008, 01:29 AM   #4
Tech Addict
 
RA99GT's Avatar
 
Join Date: Feb 2002
Location: SD
Posts: 567
Default

booo! the antenna is still on the module.
__________________
-MurfDogg Racing- Race One or Chase One! -http://www.murfdogg.com/

My RC Racing Blog- http://ra99gt-rcracing.blogspot.com/
My YouTube Channel- http://www.youtube.com/user/ra99gt
RA99GT is offline   Reply With Quote
Old 09-04-2008, 03:46 PM   #5
Tech Champion
 
RC MARKET's Avatar
 
Join Date: Feb 2007
Location: HK
Posts: 6,167
Trader Rating: 12 (100%+)
Default

Quote:
Originally Posted by RA99GT View Post
booo! the antenna is still on the module.
Yes , But this is new type 2.4G Module
RC MARKET is offline   Reply With Quote
Old 09-11-2008, 05:39 AM   #6
Tech Adept
 
Slideaway's Avatar
 
Join Date: Aug 2007
Location: Sinceny, France or Bangkok, Thailand
Posts: 218
Default

Simple question, did anyone meet any Receiver shut down due to overheating with this TX/RX ?

I'm about to sell my 3PK so I would like to know before buying somehting else.

Thanks a lot.
Slide
__________________
Ludo
Thai Ride Tech Support.
Slideaway is offline   Reply With Quote
Old 09-13-2008, 09:53 AM   #7
Tech Regular
 
Bad Mika's Avatar
 
Join Date: Nov 2004
Posts: 311
Default binding problem ??? ...

hi guys, just a quick question. i have just bought a 2nd sanwa receiver, unfortunately they shipped me the Sanwa RX-442DS reciever instead of the RX441DS receiver.

can i bind the transmitter TM-221DS with the 2nd new receiver RX-442DS (not RX-441DS) ? i am having trouble binding...

i am using the sanwa M8 trasmitter, my first set is working fine (TM-221DS & RX-441DS).

please help thanks in advance !
Bad Mika is offline   Reply With Quote
Old 09-13-2008, 07:57 PM   #8
Tech Adept
 
Slideaway's Avatar
 
Join Date: Aug 2007
Location: Sinceny, France or Bangkok, Thailand
Posts: 218
Default

Hi Bad Mika,

You can try use the RX-442DS on "static" first and see what happens.
But I've been told that the RX-442DS is new receiver able to work with the new tx module from the M11"S" only. So I doubt it could work fine with the TM-221DS.

So try static first and if it doesn't work clearly, you will just have to send it back to where you get it.

Hope it will help you.
Cheers

Slide
__________________
Ludo
Thai Ride Tech Support.
Slideaway is offline   Reply With Quote
Old 09-13-2008, 09:55 PM   #9
Tech Regular
 
Bad Mika's Avatar
 
Join Date: Nov 2004
Posts: 311
Default ?...

Quote:
Originally Posted by Slideaway View Post
Hi Bad Mika,

You can try use the RX-442DS on "static" first and see what happens.
But I've been told that the RX-442DS is new receiver able to work with the new tx module from the M11"S" only. So I doubt it could work fine with the TM-221DS.

So try static first and if it doesn't work clearly, you will just have to send it back to where you get it.

Hope it will help you.
Cheers

Slide
Hi Slideaway,

Thanks for the advice... Just one question, what do you mean by 'static' ? ...

I have the TM-221DS/RX-441DS and the RX-442DS...

Thanks,
Best Regards
Mika
Bad Mika is offline   Reply With Quote
Old 09-13-2008, 11:57 PM   #10
Tech Adept
 
Slideaway's Avatar
 
Join Date: Aug 2007
Location: Sinceny, France or Bangkok, Thailand
Posts: 218
Default

Sorry,

I mean you should try your current TX (the TM-221DS) with the RX-442DS on the car while its wheels are not touching the ground first to avoid any trouble.

According to my infos, the RX-442DS would not be compatible with the TM-221DS because this new receiver hasen't the same 2.4GHz signal.
It fits with the new M11"S" limited only (which inluded the new TM-221DA module).

Cheers
Slide
__________________
Ludo
Thai Ride Tech Support.
Slideaway is offline   Reply With Quote
Old 01-05-2009, 01:34 PM   #11
Tech Adept
 
Join Date: Dec 2006
Posts: 131
Trader Rating: 1 (100%+)
Default

hi... is it possible to purchase the receiver top cover? mine is cracked but works flawlessly. This is for the M11 2.4GHz receiver.

thanks!
gortan is offline   Reply With Quote
Old 05-25-2009, 08:37 PM   #12
Tech Rookie
 
Join Date: May 2009
Posts: 8
Default

Ok, so i just bought a brand new M11 Airtronics the other day and i was having the worst time binding it i was about ready to throw the gosh darn thing out the window... BUT i found out that it is a 3 channel receiver... well i can only use a 2 channel or a 4 channel, please correct me if i'm wrong, so now i have to go back to the store and gotta either trade the receivers out..hopefully this will help someone if they are having troubles binding.. but please correct me if i am wrong because i can't change the transmitter to channel 3 but i don't know if this receiver is compatible...help?
Tx_Mace is offline   Reply With Quote
Old 05-25-2009, 10:07 PM   #13
Tech Adept
 
Join Date: Mar 2009
Location: West Babylon, NY
Posts: 150
Trader Rating: 2 (100%+)
Default

Quote:
Originally Posted by Tx_Mace View Post
Ok, so i just bought a brand new M11 Airtronics the other day and i was having the worst time binding it i was about ready to throw the gosh darn thing out the window...
I understand this part except for all the extra ........'s
Quote:
Originally Posted by Tx_Mace View Post
BUT i found out that it is a 3 channel receiver...
Good job discovering this after you bought it.
Quote:
Originally Posted by Tx_Mace View Post
well i can only use a 2 channel or a 4 channel, please correct me if i'm wrong,
You haven't said what you are using the radio for so I don't know if you can use a 2 channel or 3 channel or 4 channel.
Quote:
Originally Posted by Tx_Mace View Post
so now i have to go back to the store and gotta either trade the receivers out..
either trade them out or what?
Quote:
Originally Posted by Tx_Mace View Post
hopefully this will help someone if they are having troubles binding..
I can't possibly see how this would help anyone.
Quote:
Originally Posted by Tx_Mace View Post
but please correct me if i am wrong because i can't change the transmitter to channel 3 but i don't know if this receiver is compatible...help?
How are we to know what receiver you speak of? I am sure many people will be offering you great advice in response to your well thought out and concise post.
TimmE is offline   Reply With Quote
Old 05-25-2009, 10:22 PM   #14
Tech Rookie
 
Join Date: May 2009
Posts: 8
Default

Well sorry for the confusing post but i am using it for a remote control car which is a associated RC8T. I didn't get to see everything when i purchased it. The receiver is model AIR92324. I can't get it to bind at all. I believe it is the wrong receiver for this transmitter, but I'm not sure. Any help is greatly appreciated.
Tx_Mace is offline   Reply With Quote
Old 05-25-2009, 11:04 PM   #15
Tech Adept
 
Join Date: Mar 2009
Location: West Babylon, NY
Posts: 150
Trader Rating: 2 (100%+)
Default

That receiver model is for the mx-3 FHSS radio. I don't know if it's compatible with the M11 FHSS-2, or FHSS transmitter modules. What transmitter do you have? Did you buy your radio new? Is this the receiver that came with it?

Last edited by TimmE; 05-25-2009 at 11:40 PM.
TimmE is offline   Reply With Quote
Reply



Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off



All times are GMT -7. It is currently 08:41 AM.


Powered By: vBulletin v3.9.2.1
Privacy Policy | Terms of Use | Advertise Content © 2001-2011 RCTech.net