KO Propo 2.4Mhz... - Page 37

mjc168 · 10-20-2009, 10:10 PM

I am using KO Propo Helios with 2.4Ghz module and receiver. Recently I have problem to turn on the module randomly. This is not only happen on my KO radio but some of my friend too...
There are some cases i notice, while my friend turn on his KO radio, my radio/module will not able to turn on. I need to turn on the radio far always from my friend. I have try to rebind it, but still the same....Its not only cause by a KO radio but some 4pk radio will cause my radio not able to turn on...Do you guy facing the same issue like this? if yes, how u resolve your problem? Thanks

JasonC · 10-20-2009, 10:53 PM

Quote:

Originally Posted by unsp0ken

i was able to grab an ex-1 for a great price off of another member. i love the overall feel so far. my only gripe is that i can't make the throttle finger space any smaller. i have skinny fingers so i need to be able to adjust the brake lever back a little more but i think it's as far back as it goes. that eurus looks like the trigger finger spacing can be adjusted smaller hmm... nice

have you tried putting some fuel tubing on the trigger or heating up the trigger with a lighter and mold the triger to you finger?

unsp0ken · 10-20-2009, 11:05 PM

Quote:

Originally Posted by JasonC

have you tried putting some fuel tubing on the trigger or heating up the rigger with a lighter and mold the triger to you finger?

oo great idea on the fuel tubing. gonna try it. i was thinking foam but the fuel tubing might be better

ezveedub · 10-21-2009, 12:41 AM

Quote:

Originally Posted by mjc168

I am using KO Propo Helios with 2.4Ghz module and receiver. Recently I have problem to turn on the module randomly. This is not only happen on my KO radio but some of my friend too...
There are some cases i notice, while my friend turn on his KO radio, my radio/module will not able to turn on. I need to turn on the radio far always from my friend. I have try to rebind it, but still the same....Its not only cause by a KO radio but some 4pk radio will cause my radio not able to turn on...Do you guy facing the same issue like this? if yes, how u resolve your problem? Thanks

Send the 2.4 Rx & Tx modules in for service. There is an update for that concern.

mjc168 · 10-21-2009, 07:39 AM

Quote:

Originally Posted by ezveedub

Send the 2.4 Rx & Tx modules in for service. There is an update for that concern.

Thanks for your reply....do I need to send back whole radio to service? or just the module and receiver? usually how long will it take? do i need to pay for the return postage?

ezveedub · 10-21-2009, 09:15 AM

Quote:

Originally Posted by mjc168

Thanks for your reply....do I need to send back whole radio to service? or just the module and receiver? usually how long will it take? do i need to pay for the return postage?

If your in the US, then send it to Robert @ KO America. If not, then you have to send it to the service center for you're country.

mjc168 · 10-21-2009, 06:48 PM

Quote:

Originally Posted by ezveedub

If your in the US, then send it to Robert @ KO America. If not, then you have to send it to the service center for you're country.

The problem is my country do no have any KO service center....so I plan to send to the KO factory my self....

unsp0ken · 10-25-2009, 12:19 PM

anyone have that issue with the ex-1 ur wheel foam and it moving around too much? sometimes it slides while im driving and it throws me off.

Matthijs · 10-25-2009, 01:33 PM

Quote:

Originally Posted by unsp0ken

anyone have that issue with the ex-1 ur wheel foam and it moving around too much? sometimes it slides while im driving and it throws me off.

so, tape it!

Jammin57 · 10-25-2009, 04:41 PM

Put some thin double sided tape under the foam

NitroWD · 10-27-2009, 07:02 AM

got the answer...sorry for posting.

stiltskin · 11-01-2009, 01:15 PM

Quote:

Originally Posted by unsp0ken

anyone have that issue with the ex-1 ur wheel foam and it moving around too much? sometimes it slides while im driving and it throws me off.

I put a small dab of super glue in a couple of spots and it doesn't move now.

whitrzac · 11-03-2009, 09:48 AM

why won't the 407 RX work with the 901 modual?? is it just slower, or will it not work at all??

KO PROPO Staff · 11-03-2009, 12:19 PM

Quote:

Originally Posted by whitrzac

why won't the 407 RX work with the 901 modual?? is it just slower, or will it not work at all??

It will work see.

whitrzac · 11-03-2009, 05:08 PM

Quote:

Originally Posted by KO PROPO Staff

It will work see.

thanks, but you might want to send a memo to your online dealers, they ALL say that the 407 will ONLY work with the EX5...

whats the diffrance between the 2 RXs????