1/5th scale on road wings
03-17-2017, 02:27 PM
#1
1/5th scale on road wings
Carbon fiber wings for 1/5th scale on road racing, both wings are ROAR legal.
The wings and side plates are laid up with several layers of 5.7 ounce twill weave carbon fiber cloth. Parts are laminated with Resin Research epoxy resin and vacuum bagged into a mold until fully cured. After final trim and sanding, parts are painted with an automotive clear lacquer, wet sanded down to 2000 grit and buffed out with rubbing compound and polish.
Gull Wing – similar to the MF Raceline wing from Europe, angles and dimensions have been tweaked a bit to get a little more surface area. Locals have been running this wing since early 2016 and several were in the A Mains at the 2016 5th Scale International Challenge down in in Southern California.
TC Wing – basically a 1/10 scale touring car wing scaled up to 1/5 scale. Wing has a removable lexan wicker bill for more tuning ability. Should be a good option when higher down force is desired.
$140 each, I cover shipping ( USPS Priority ) and PayPal fees.
I’m new to selling on RCTech, but have a lot of feedback on RCGroups https://www.rcgroups.com/forums/itrader.php?u=63003
Feel free to ask questions
Thanks,
Bruce
PS - forum limits how many pictures per thread - TC wing pictures in next post
The wings and side plates are laid up with several layers of 5.7 ounce twill weave carbon fiber cloth. Parts are laminated with Resin Research epoxy resin and vacuum bagged into a mold until fully cured. After final trim and sanding, parts are painted with an automotive clear lacquer, wet sanded down to 2000 grit and buffed out with rubbing compound and polish.
Gull Wing – similar to the MF Raceline wing from Europe, angles and dimensions have been tweaked a bit to get a little more surface area. Locals have been running this wing since early 2016 and several were in the A Mains at the 2016 5th Scale International Challenge down in in Southern California.
TC Wing – basically a 1/10 scale touring car wing scaled up to 1/5 scale. Wing has a removable lexan wicker bill for more tuning ability. Should be a good option when higher down force is desired.
$140 each, I cover shipping ( USPS Priority ) and PayPal fees.
I’m new to selling on RCTech, but have a lot of feedback on RCGroups https://www.rcgroups.com/forums/itrader.php?u=63003
Feel free to ask questions
Thanks,
Bruce
PS - forum limits how many pictures per thread - TC wing pictures in next post
Last edited by belewis01; 03-17-2017 at 04:39 PM.
03-18-2017, 11:54 AM
#4
Maybe ..... Looks like a reduced width version of the TC wing might work. If you could point me to the wing rules for GT8 I'll take a look. I'd need min / max dimensions of the wing, and how it is mounted.
If you're not too concerned with being legal, I have some parts that could be adapted as well.
Bruce
If you're not too concerned with being legal, I have some parts that could be adapted as well.
Bruce
03-18-2017, 12:36 PM
#5
Nice work Bruce
03-18-2017, 11:49 PM
#6
Maybe ..... Looks like a reduced width version of the TC wing might work. If you could point me to the wing rules for GT8 I'll take a look. I'd need min / max dimensions of the wing, and how it is mounted.
If you're not too concerned with being legal, I have some parts that could be adapted as well.
Bruce
If you're not too concerned with being legal, I have some parts that could be adapted as well.
Bruce
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
