For Sale Axial BOMBER. I built this rig from all Brand New parts. I started with a new bomber chassis and added what I thought were the best parts that would perform the best together and be very reliable (Nothing worse then having to cut a day short because of a broken rig) This rig is most definitely my best all around performing machine. If you want to go fast or hit the trails, just shift it in high gear and let it roll. If you want hit the rocks or do some serious climbing, just shift it into low gear and rock. The rig only has a total of 3, 2 cell 7.4V 7200 MAH SMC packs run through it. It’s really only had a few shake down runs and just enough time to dial in the suspension and the ESC to where the rig handles any and all terrain. Your buying a rig that has been built right, no short cuts taken or hacked up and definitely no money was spared. I wish I could keep this but I have some medical bills coming in that I will need to start paying.
Vanquish - OMF Type R light weight beadlocks w/OMF scalloped outer beadlock rings
Vanquish - SLW polished aluminum wheel hubs
Axial - Falken WILDPEAK M/T (R35) tires w/CI Double Deuce dual stage foams, standard inner w/firm outers
Axial - AR60 axles front and rear
Axial - HD gears front and rear 38/13
Incision - spool/lockers front and rear
Vanquish - Aluminum bearing caps (red) front and rear
Axial - OCP universal front axles
CBRB FAB - AR60 titanium rear axle shafts
Vanquish - Diff cover (Rear) black
RC4WD - ARB Diff cover (Front) red
Axial - 12mm aluminum hubs
Vanquish - Stage 1 kit (Black) Knuckles, Chubs and rear lockouts
Incision - Suspension and steering linkage
Vanquish - Rear lower trailing arms
Vanquish - Steering servo mount (Black)
Vanquish - Clamping steering servo clamps (Black)
SSD - Aluminum clamping steering servo horn (25T/Black)
UC Fab - Rear sway bar
MIP - Bombproof Bomber driveshafts from Supershafty
Axial Bomber (Kit) transmission w/Axial 2 speed kit and a Tactic TSX45 (metal gear) shift servo
HR - Steel transfer case gears
Vanquish - Aluminum motor mount and motor cam (Black)
HOBBY WING - Xerun V3.1 Brushless/Brushed Competition ESC 120A with a custom tune installed in the ESC
Tekin - Brushless motor 13.5T (I removed this from my Wraith and it is in very good condition, vey little use, never been in water or mud and has never over heated)
Avid - Bearings used through out the build
I’ve done a couple minor upgrades to the appearance just in the last week or so. I added a radiator and mount behind the passenger compartment and I’ve also custom painted the fuel cell.
I’m sure I’m forgetting some parts here and there but between the pictures and the parts list you can pretty much see what you buying. If there are any questions please don’t hesitate to ask.
Asking $780.00 OBO shipped conus & I will consider trades of equal value, looking for a scale rig or a custom crew cab truggy.