Custom Vanquish Currie Rockjock 70 Axles for Wraith/Bomber/Yeti - NEW!!!
10-27-2016, 05:50 AM
#1
Custom Vanquish Currie Rockjock 70 Axles for Wraith/Bomber/Yeti - NEW!!!
SOLD
Hello and thanks for looking. I'm selling a complete set of Vanquish Products Front and Rear Currie Rockjock 70 axles in new condition. These are Grey in color and come fully complete, ready to install on Axial Wraith or Axial RR10 Bomber. The rear axle will also work on 1/10 Axial Yeti.
The rear axle has been configured for the centered pumpkin setup. I'm including the OCP Currie Axle Tubes and OCP Rear Currie Axle Truss, however you will need to the internal OCP axle shafts should you wish to revert back.
List of parts used...
Vanquish Products "Currie Rockjock 70" Front Axle (Grey) - VPS06623 - $169.00
Vanquish Products "Currie Rockjock 70" Rear Axle (Grey) - VPS06624 - $140.99
Vanquish Products "Currie Rockjock" Center Pumpkin Rear Axle Tubes (Grey) - VPS07431 - $29.99
Vanquish Products "Currie Rockjock" Truss/Upper Link Mount (Grey) - VPS06712 - $24.99
Vanquish Products "Currie Rockjock" Servo Mount (Grey) - VPS06702 - $15.49
Vanquish Products Wraith Scale Steering Knuckle Set (Grey) - VPS07002 - $49.99
Vanquish Products Wraith Scale C-Hub Set (Grey) - VPS07012 - $49.99
Vanquish Products Full Floating Heavy Duty Locker x2 - VPS05990 - $67.98
Vanquish Products Wraith VVD V1-HD 4mm Stub Axle Set - VPS07370 - $64.99
Vanquish Products Wraith/Yeti Center Pumpkin Rear HD Axle Shafts - VPS07420 - $34.95
Vanquish Products Wraith Aluminum Servo Mount Set (Black) - VPS06933 - $13.85
Vanquish Products Aluminum 12mm Clamping Wheel Hex (Black) x2 - VPS07082 - $26.98
Vanquish Products Knuckle Bushings - VPS07510 - $6.99
MIP Axial Wraith Spline Center CVD Kit - MIP11116 - $56.99
Blue Monkey Titanium Steerling & Drag Link Kit for Wraith with VP Scale Knuckles - BM-199-VPS - $34.99
Axial Racing Heavy Duty Bevel Gear Set (43/13) x2 - AX30395 - $51.98
Axial Racing Servo Mount Plate - AX30777 - $6.99
Protek RC rubber shielded bearings - $12.00
There's over $850 invested with everything purchased from RPP, Amainhobbies or Blue Monkey RC. Buy with confidence, built by experienced, mature RC enthusiast with insane attention to detail. Loc-tite used accordingly, axle covers sealed with thin coat of RTV & Mobil 1 synthetic grease applied to ring/pinion gears.
I will not part these out, please do not ask. Price is SOLD shipped w/insurance to 48 states address. Please no trades or low ball offers. Also note, these will be listed on eBay in the next day or so.
Send questions to [email protected]
Pictures of Custom VP Currie Axles
Hello and thanks for looking. I'm selling a complete set of Vanquish Products Front and Rear Currie Rockjock 70 axles in new condition. These are Grey in color and come fully complete, ready to install on Axial Wraith or Axial RR10 Bomber. The rear axle will also work on 1/10 Axial Yeti.
The rear axle has been configured for the centered pumpkin setup. I'm including the OCP Currie Axle Tubes and OCP Rear Currie Axle Truss, however you will need to the internal OCP axle shafts should you wish to revert back.
List of parts used...
Vanquish Products "Currie Rockjock 70" Front Axle (Grey) - VPS06623 - $169.00
Vanquish Products "Currie Rockjock 70" Rear Axle (Grey) - VPS06624 - $140.99
Vanquish Products "Currie Rockjock" Center Pumpkin Rear Axle Tubes (Grey) - VPS07431 - $29.99
Vanquish Products "Currie Rockjock" Truss/Upper Link Mount (Grey) - VPS06712 - $24.99
Vanquish Products "Currie Rockjock" Servo Mount (Grey) - VPS06702 - $15.49
Vanquish Products Wraith Scale Steering Knuckle Set (Grey) - VPS07002 - $49.99
Vanquish Products Wraith Scale C-Hub Set (Grey) - VPS07012 - $49.99
Vanquish Products Full Floating Heavy Duty Locker x2 - VPS05990 - $67.98
Vanquish Products Wraith VVD V1-HD 4mm Stub Axle Set - VPS07370 - $64.99
Vanquish Products Wraith/Yeti Center Pumpkin Rear HD Axle Shafts - VPS07420 - $34.95
Vanquish Products Wraith Aluminum Servo Mount Set (Black) - VPS06933 - $13.85
Vanquish Products Aluminum 12mm Clamping Wheel Hex (Black) x2 - VPS07082 - $26.98
Vanquish Products Knuckle Bushings - VPS07510 - $6.99
MIP Axial Wraith Spline Center CVD Kit - MIP11116 - $56.99
Blue Monkey Titanium Steerling & Drag Link Kit for Wraith with VP Scale Knuckles - BM-199-VPS - $34.99
Axial Racing Heavy Duty Bevel Gear Set (43/13) x2 - AX30395 - $51.98
Axial Racing Servo Mount Plate - AX30777 - $6.99
Protek RC rubber shielded bearings - $12.00
There's over $850 invested with everything purchased from RPP, Amainhobbies or Blue Monkey RC. Buy with confidence, built by experienced, mature RC enthusiast with insane attention to detail. Loc-tite used accordingly, axle covers sealed with thin coat of RTV & Mobil 1 synthetic grease applied to ring/pinion gears.
I will not part these out, please do not ask. Price is SOLD shipped w/insurance to 48 states address. Please no trades or low ball offers. Also note, these will be listed on eBay in the next day or so.
Send questions to [email protected]
Pictures of Custom VP Currie Axles
Last edited by scrapsz; 10-28-2016 at 07:15 PM. Reason: SOLD
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
