Hardly Used Fully Upgraded HPI Nitro *Mini* RS4 for Sale
#1
Regional Moderator
Thread Starter
Hardly Used Fully Upgraded HPI Nitro *Mini* RS4 for Sale
Hello. I am selling a barely used FULLY UPGRADED HPI Nitro Mini. It has EVERY hop-up ever made for this car. I purchased this car since my local track started a class for these Nitro Mini's. Due to poor turnouts and little interest (in my area) the class was nullified. I must have used it 5-6 times at most and never used it again. Please note that this car is a COLLECTORS ITEM. HPI does not manufacturer these cars anymore nor does any aftermarket manufacturers produce hop-ups for it anymore. It is simply not sold anymore. Not only is it a very hard to find car but the hop-ups I have on it are IMPOSSIBLE to find. This is an extremely unique car in which all of the hop-parts on it you can only get from me. It has the same status quo as any Tamiya Bruiser or Mountaineer. It is truly one hot commidity.
Here is a list of all the hop-ups it includes:
HPI:
Hard Anodized Aluminum 3mm Fully Countersunk Super Chassis
Front One-Way Differential
Rear Ball Differential
Graphite Upper Deck with Graphite Battery Mount
Graphite Rear Y-Brace
Polished Aluminum Upper Deck Stand-Offs
Hard Anodized Aluminum Super Shocks
Ultra-Tune Orange Stiff Shock Springs (car includes stock soft- Silver Springs as well)
Foam Front Bumper with Polished Aluminum Standoffs
Fiber Brake Disc
BALL BEARING steering
Purple Anodized Aluminum Adjustable Ball Bearing Front Belt Tensioner
Stainless Steel Hingepins For Front and Rear Suspension
X-Pattern Mini Slicks for front and rear
Blue Medium Foam Inserts for X-Pattern Mini Slicks
Mazda Miata Body
WOLFPACK RADICALS:
Purple Anodized Aluminum Adjustable "Rotating Arm" ball-bearing Side Belt Brace
Purple Anodized Aluminum Lightweight Vented Flywheel
Purple Anodized Heatsink Engine Mounts
SEVERAL Purple Anodized Aluminum Locknuts
Blue Aluminum Wheel Locknuts
Purple Anodized Aluminum Knurled-Grip Antenna Mount
MIP:
Front and Rear CVD's
Purple Anodized Aluminum 360 Degree Rear Exhaust Stinger Tuned Pipe and Manifold with 3 mm thick Ultra-Tune Fiberglass Shock Tower
*BRAND NEW, NEVER USED, still in the package* Titanium Nitride Coated Golden Shock Shafts for front and rear shocks
HAMMAD GHUMAN:
Polished Aluminum LIGHTWEIGHT Mid and Rear Belt Shafts
BOCA BEARINGS:
Fully Equipped with Boca Ball Bearings. Every part that requires a-bushing/bearing has a Boca Ball Bearing instead.
KAWADA:
Brushed Aluminum 8-Spoke Wheels
RPM:
Black Ball Cups for Steering tie-rods
MOTOR SAVERS AIR FILTERS:
Motor Savers Air Filter
GENERAL SILICONES:
Purple Silicone Air Filter Mount
Blue Silicone ULTRA SOFT Fuel Tubing
Purple Silicone Tuned Pipe Coupler
TRINITY:
SEVERAL Blue Anodized Aluminum Countersunk Washers
This car will also include the HPI Nitro Star .12 Pull-Start Engine and Mazda Miata body. It can also be purchased with a BRAND NEW, NEVER USED GS Racing TurboBox Starter Box including 2 BRAND NEW Trinity Chameleon 2 PRO Dyno Tuned Motors, and BRAND NEW, still in the package Deans Ultra Wire and Deans Connectors.
I have the instructions and all addendums as well. Please e-mail me at [email protected] for several pictures of this car as well as more information.
Here is a list of all the hop-ups it includes:
HPI:
Hard Anodized Aluminum 3mm Fully Countersunk Super Chassis
Front One-Way Differential
Rear Ball Differential
Graphite Upper Deck with Graphite Battery Mount
Graphite Rear Y-Brace
Polished Aluminum Upper Deck Stand-Offs
Hard Anodized Aluminum Super Shocks
Ultra-Tune Orange Stiff Shock Springs (car includes stock soft- Silver Springs as well)
Foam Front Bumper with Polished Aluminum Standoffs
Fiber Brake Disc
BALL BEARING steering
Purple Anodized Aluminum Adjustable Ball Bearing Front Belt Tensioner
Stainless Steel Hingepins For Front and Rear Suspension
X-Pattern Mini Slicks for front and rear
Blue Medium Foam Inserts for X-Pattern Mini Slicks
Mazda Miata Body
WOLFPACK RADICALS:
Purple Anodized Aluminum Adjustable "Rotating Arm" ball-bearing Side Belt Brace
Purple Anodized Aluminum Lightweight Vented Flywheel
Purple Anodized Heatsink Engine Mounts
SEVERAL Purple Anodized Aluminum Locknuts
Blue Aluminum Wheel Locknuts
Purple Anodized Aluminum Knurled-Grip Antenna Mount
MIP:
Front and Rear CVD's
Purple Anodized Aluminum 360 Degree Rear Exhaust Stinger Tuned Pipe and Manifold with 3 mm thick Ultra-Tune Fiberglass Shock Tower
*BRAND NEW, NEVER USED, still in the package* Titanium Nitride Coated Golden Shock Shafts for front and rear shocks
HAMMAD GHUMAN:
Polished Aluminum LIGHTWEIGHT Mid and Rear Belt Shafts
BOCA BEARINGS:
Fully Equipped with Boca Ball Bearings. Every part that requires a-bushing/bearing has a Boca Ball Bearing instead.
KAWADA:
Brushed Aluminum 8-Spoke Wheels
RPM:
Black Ball Cups for Steering tie-rods
MOTOR SAVERS AIR FILTERS:
Motor Savers Air Filter
GENERAL SILICONES:
Purple Silicone Air Filter Mount
Blue Silicone ULTRA SOFT Fuel Tubing
Purple Silicone Tuned Pipe Coupler
TRINITY:
SEVERAL Blue Anodized Aluminum Countersunk Washers
This car will also include the HPI Nitro Star .12 Pull-Start Engine and Mazda Miata body. It can also be purchased with a BRAND NEW, NEVER USED GS Racing TurboBox Starter Box including 2 BRAND NEW Trinity Chameleon 2 PRO Dyno Tuned Motors, and BRAND NEW, still in the package Deans Ultra Wire and Deans Connectors.
I have the instructions and all addendums as well. Please e-mail me at [email protected] for several pictures of this car as well as more information.
Last edited by racer rich; 11-16-2002 at 11:46 AM.
#2
Tech Apprentice
Any pricing on it?
#3
Regional Moderator
Thread Starter
ProRacer03-
You have a private message.
You have a private message.
#4
Regional Moderator
Thread Starter
^
#5
Regional Moderator
Thread Starter
^
#6
Tech Master
mini
i will trade for a txt ready to run with radio and esc
#7
Regional Moderator
Thread Starter
centax error!-
I am sorry, but I am not accepting any trades.
I am sorry, but I am not accepting any trades.
#8
Regional Moderator
Thread Starter
^
#9
Regional Moderator
Thread Starter
Pictures are now available. Please e-mail me for 24 pictures of this Hardly Used Fully Upgraded HPI Nitro Mini.
#10
Regional Moderator
Thread Starter
^
#11
Regional Moderator
Thread Starter
^
#12
Regional Moderator
Thread Starter
^
#13
Tech Apprentice
i'll give you 2 bills for it. $200
#14
Regional Moderator
Thread Starter
^
#15
Tech Apprentice
Is that a no? I want to offer something reasonable but at the same time it is a used car.
I could get a mtx-3 w/ MR-12 mugen engine for the price that your askin for. I'm not trying to hate, just want you to know why I gave the price I did.
Actually, I was able to buy a couple of them when HPI re-released them with the .15 fe motor.
I could get a mtx-3 w/ MR-12 mugen engine for the price that your askin for. I'm not trying to hate, just want you to know why I gave the price I did.
Actually, I was able to buy a couple of them when HPI re-released them with the .15 fe motor.
Last edited by ProRacer03; 12-03-2002 at 10:03 PM.