Getting out of nitro
#1
Getting out of nitro
Traxxas Revo:
The revo has a bunch of extra parts which include a Big block conversion kit, all the gears to make the transmission have reverse minus the servo, different servo adapters for the different servo manufacturers, wiring for an Ez start, a bump box that has 2 onyx 3000mah batteries which are good and 2 1500mah batteries which i think are bad but i'm not to sure, and 3 full sets of tires. It has a Traxxas 3.3 engine ran on byron 20% gen2 race fuel less than 2 gallons, with a hitec 657 metal gear throttle servo, and traxxas 2808 non-waterproof servos for steering, a spketrum receiver, and a 1900mah battery. all you need to run it is to bind a radio to it. Asking $175 OBO http://imgur.com/a/JQoGV
Team Losi 8ight:
The Losi 8ight buggy is the 1.0 version with an acer 1313 steering and throttle servo, an rb msc c6 engine run on Byron 20% fuel has had less than 2 gallons through it, spketrum sr3001 pro receiver, a bec for the lipo battery, a reedy lipo not 100% sure of the mah, a total of 4 bodies, 3 are practice bodies while the 4th is a custum painted body and has never been used except for display, also comes with 4 panther wheels and tires with about 85% tread left, and a losi bump box with out the batteries, all that is needed to run it is a radio, fuel, glow igniter,bump box batteries, and to charge the receiver battery. Asking $275 OBO
Team Losi 8ightT:
The Losi 8ightT truggy is also the 1.0 version with a Hitec HS-5955tg steering servo, Hitec HSC-5997tg throttle and brake servo, an ofna vzb v-spec motor that has been ran on Byron 20% fuel has had less than 3 gallons through it, but it has great compression still have to heat it up before the bump box will turn it over and it is a strong running motor, no reciever will be included, 2 bodies a plane silver one and a custom painted one that matches the buggy body, kings head throttle servo bracket, aluminum top plates and chassis braces, and i beleive a 1900mah nimh receiver battery, also comes with 4 losi wheels with losi xtt tires with about 80% tread left, an ofna bump box with a gel cell battery. The truggy comes with a spare wing and a bag full of springs and other stock parts. what is needed to run it is a radio and receiver, fuel, glow igniter, and to charge the receiver and bump box batteries. SOLD
if you have any question or need more picks just ask, also feel free o shoot me offers the worst i can do is say no
The revo has a bunch of extra parts which include a Big block conversion kit, all the gears to make the transmission have reverse minus the servo, different servo adapters for the different servo manufacturers, wiring for an Ez start, a bump box that has 2 onyx 3000mah batteries which are good and 2 1500mah batteries which i think are bad but i'm not to sure, and 3 full sets of tires. It has a Traxxas 3.3 engine ran on byron 20% gen2 race fuel less than 2 gallons, with a hitec 657 metal gear throttle servo, and traxxas 2808 non-waterproof servos for steering, a spketrum receiver, and a 1900mah battery. all you need to run it is to bind a radio to it. Asking $175 OBO http://imgur.com/a/JQoGV
Team Losi 8ight:
The Losi 8ight buggy is the 1.0 version with an acer 1313 steering and throttle servo, an rb msc c6 engine run on Byron 20% fuel has had less than 2 gallons through it, spketrum sr3001 pro receiver, a bec for the lipo battery, a reedy lipo not 100% sure of the mah, a total of 4 bodies, 3 are practice bodies while the 4th is a custum painted body and has never been used except for display, also comes with 4 panther wheels and tires with about 85% tread left, and a losi bump box with out the batteries, all that is needed to run it is a radio, fuel, glow igniter,bump box batteries, and to charge the receiver battery. Asking $275 OBO
Team Losi 8ightT:
The Losi 8ightT truggy is also the 1.0 version with a Hitec HS-5955tg steering servo, Hitec HSC-5997tg throttle and brake servo, an ofna vzb v-spec motor that has been ran on Byron 20% fuel has had less than 3 gallons through it, but it has great compression still have to heat it up before the bump box will turn it over and it is a strong running motor, no reciever will be included, 2 bodies a plane silver one and a custom painted one that matches the buggy body, kings head throttle servo bracket, aluminum top plates and chassis braces, and i beleive a 1900mah nimh receiver battery, also comes with 4 losi wheels with losi xtt tires with about 80% tread left, an ofna bump box with a gel cell battery. The truggy comes with a spare wing and a bag full of springs and other stock parts. what is needed to run it is a radio and receiver, fuel, glow igniter, and to charge the receiver and bump box batteries. SOLD
if you have any question or need more picks just ask, also feel free o shoot me offers the worst i can do is say no
Last edited by ArgonXenon2; 02-17-2016 at 11:23 AM.
#2
#3
bump
#4
Bump
#5
Tech Rookie
What kind of revo big block mount do you have
#6
the traxxas big block conversion kit
Last edited by ArgonXenon2; 01-12-2016 at 10:41 PM.
#7
Bump
#8
#9
#10
price drop
revo: $250
buggy: $375
truggy: $375
revo: $250
buggy: $375
truggy: $375
#11
bump
#12
Bump
#13
bump
#14
Bump