AWESOMATIX A700 EV0 2 + parts
#1
AWESOMATIX A700 EV0 2 + parts
[SOLD]
Hi all,
I decided to retire from touring car to concentrate on pan car, so I sell my Awesomatix A700 Evo “2” full option with lot of parts:
So, it is basically an A700 Evo 1 (with FFG 1.1) from October 2014. I ran it only 2 races on carpet (10.5t blinky). I upgraded it early 2015 with the Evo 2 parts and never ran it after because I discovered pan car.
Parts and option parts installed on the car:
- AS700-L brushless low profile servo (barely used)
- FFG 1.1
- C01AL-S2 Evo 2 aluminium chassis (brand new, never used + protective seal) with C21-3 upper deck and AM33-5 long chassis stiffener + AM49-3 FFG short tower
- MM2 Evo 2 floating motor mount (brand new, never used)
- D2-S Evo 2 damper (4) (brand new, never used)
- SD2 (brand new, never used)
- GD2-S gear differential with plastic gears
- AT03M-S spool with spring steel outdrives (brand new)
- AM06S front short steering blocks and AM06M rear narrow steering blocks
- AM19 rear upper arm holder (short)
- 4 universal drive shafts with ST17-1-S and UB 1
- AT21-S pivot ball short, AT04-2 stiffer main shaft, AM10-2 steering plate, P42 sway bar stopper
- C07 carbon bumper, AM12-1 battery holders and AT22 rear body holder
The car will come with lot of parts (I will list the main parts, please refer to pictures to see all of them:
- AS-700-GLS internal gears for Awesomatix servo, Xray gears for diff, AM05-1 (x3), AM08-1, B84RS, OR05 (x3), PIN02 (x3), P16, ST05, SPR01, SPR01S and SPR02 (all these parts are brand NIP)
- 1 GD2-S w/plastic gears (brand new, never filled), 1 GD2-S with alu gears (used once), 1 GD1 with G05ST, G06ST, option outdrives (ST23 and ST26) (filled with Ride Diff putty #45, to act as a spool), 1 AT03M-S spool (brand new, never used) + parts for differentials (GD2 internal gears, GD2 cross brace, set screws for GD2 outdrives, O-rings, AT24, spool outdrive)
- a complete SD1
- 4 complete drive shafts with ST17-1-S
- brand new parts (including ST01, ST13, ST16, ST17-1-S) to build 2 pairs of front drive shafts and 1 pair of rear shafts (including ST02, ST14, ST16) + lot of small parts for shafts (UB 1, ST 10, ST11, e-clips,bearings,…)
- AT13 (2 pairs), G03 (x2), AT04-2 (brand NIP), DT02 , P10
- P01, P02, P03, P04, P05, P06-1, P07, P09, P12
- SPR01, SPR01S, SPR02, SPR03
- upper arms (different length), C04 suspension arms (x6), all the sway bars (from 1.0mm to 1.4mm, each in two exemplars)
- AM06S short steering blocks (1 pair), AM06M (1 pair), AM06 (2 pairs), AM18-1 (x3), AM26 (1 pair)
- complete front bumper set, AM01-1 gear box
-…
The car will come with the original box, the damper gauge, the instruction manual,…
I will also give with the car 3 bodies (a brand new PF Mazda Speed 6 unpainted, 2 PF Mazda Speed 6 painted + wings) and 3 sets of Sorex tires (used)
Even if I didn’t ride a lot with this car, it was revised before the sale. Please note if a part is not in good shape, a set of new one is given in the sale.
Link to see all the pictures of the car and parts: https://drive.google.com/open?id=0Bz...DZtYlMxNjQ5T1k
Sale conditions: Shipment everywhere in the world with insurance and tracking number from Belgium.
Payment method: Paypal
Price: sold
If you have any questions, particular requests, if you need more informations, other pictures,...feel free to contact me by PM.
Thanks a lot for your interest,
Best regards,
G-rem
Hi all,
I decided to retire from touring car to concentrate on pan car, so I sell my Awesomatix A700 Evo “2” full option with lot of parts:
So, it is basically an A700 Evo 1 (with FFG 1.1) from October 2014. I ran it only 2 races on carpet (10.5t blinky). I upgraded it early 2015 with the Evo 2 parts and never ran it after because I discovered pan car.
Parts and option parts installed on the car:
- AS700-L brushless low profile servo (barely used)
- FFG 1.1
- C01AL-S2 Evo 2 aluminium chassis (brand new, never used + protective seal) with C21-3 upper deck and AM33-5 long chassis stiffener + AM49-3 FFG short tower
- MM2 Evo 2 floating motor mount (brand new, never used)
- D2-S Evo 2 damper (4) (brand new, never used)
- SD2 (brand new, never used)
- GD2-S gear differential with plastic gears
- AT03M-S spool with spring steel outdrives (brand new)
- AM06S front short steering blocks and AM06M rear narrow steering blocks
- AM19 rear upper arm holder (short)
- 4 universal drive shafts with ST17-1-S and UB 1
- AT21-S pivot ball short, AT04-2 stiffer main shaft, AM10-2 steering plate, P42 sway bar stopper
- C07 carbon bumper, AM12-1 battery holders and AT22 rear body holder
The car will come with lot of parts (I will list the main parts, please refer to pictures to see all of them:
- AS-700-GLS internal gears for Awesomatix servo, Xray gears for diff, AM05-1 (x3), AM08-1, B84RS, OR05 (x3), PIN02 (x3), P16, ST05, SPR01, SPR01S and SPR02 (all these parts are brand NIP)
- 1 GD2-S w/plastic gears (brand new, never filled), 1 GD2-S with alu gears (used once), 1 GD1 with G05ST, G06ST, option outdrives (ST23 and ST26) (filled with Ride Diff putty #45, to act as a spool), 1 AT03M-S spool (brand new, never used) + parts for differentials (GD2 internal gears, GD2 cross brace, set screws for GD2 outdrives, O-rings, AT24, spool outdrive)
- a complete SD1
- 4 complete drive shafts with ST17-1-S
- brand new parts (including ST01, ST13, ST16, ST17-1-S) to build 2 pairs of front drive shafts and 1 pair of rear shafts (including ST02, ST14, ST16) + lot of small parts for shafts (UB 1, ST 10, ST11, e-clips,bearings,…)
- AT13 (2 pairs), G03 (x2), AT04-2 (brand NIP), DT02 , P10
- P01, P02, P03, P04, P05, P06-1, P07, P09, P12
- SPR01, SPR01S, SPR02, SPR03
- upper arms (different length), C04 suspension arms (x6), all the sway bars (from 1.0mm to 1.4mm, each in two exemplars)
- AM06S short steering blocks (1 pair), AM06M (1 pair), AM06 (2 pairs), AM18-1 (x3), AM26 (1 pair)
- complete front bumper set, AM01-1 gear box
-…
The car will come with the original box, the damper gauge, the instruction manual,…
I will also give with the car 3 bodies (a brand new PF Mazda Speed 6 unpainted, 2 PF Mazda Speed 6 painted + wings) and 3 sets of Sorex tires (used)
Even if I didn’t ride a lot with this car, it was revised before the sale. Please note if a part is not in good shape, a set of new one is given in the sale.
Link to see all the pictures of the car and parts: https://drive.google.com/open?id=0Bz...DZtYlMxNjQ5T1k
Sale conditions: Shipment everywhere in the world with insurance and tracking number from Belgium.
Payment method: Paypal
Price: sold
If you have any questions, particular requests, if you need more informations, other pictures,...feel free to contact me by PM.
Thanks a lot for your interest,
Best regards,
G-rem
Last edited by G-rem; 09-19-2015 at 12:07 AM.