Getting out of all small scale. Most 1/18
#1
Getting out of all small scale. Most 1/18
I'm getting out of all small scale racing. I have a bunch of Duratrax Vendetta and Associated RC18 vehicles and parts. I'll list it all below. All open to best offers and possible trades for 1/10 scale cars and electronics. Best to just shoot me a message and see if we can work something out.
Duratrax Vendetta ST Truck (Green Body) - Graphite Chassis, 3900KV Ammo brushless motor, Ball diffs front and rear, aluminum shocks rear, Steel CVDs front and rear, adjustable turnbuckles front, rear and steering,
stock servo, aluminum upper front arms, aluminum front knuckles, aluminum wheel hexs front and rear, aluminum front upper suspension arm mount, carbon fiber servo hold down, aluminum shock stand offs front and rear.
Indoor carpet raced only. Never driven outside so it is extremely clean. - $150.00 OBO
Duratrax Vendetta ST Truck (Red / Blue Body) - Graphite Chassis, 5100KV Ammo brushless motor, Ball diffs front and rear, aluminum shocks front, Steel CVDs front and rear, adjustable turnbuckles front, rear and steering,
stock servo, aluminum upper front arms, aluminum front knuckles, aluminum wheel hexs front and rear, aluminum front upper suspension arm mount, carbon fiber servo hold down, aluminum shock stand offs front and rear.
Indoor carpet raced only. Never driven outside so it is extremely clean. - $150.00 OBO
Duratrax Vendetta EP Buggy (Green / Yellow Body) - All stock with aluminum motor heatsink, carbon fiber servo hold down, adjustable turnbuckles front, rear and steering. - $100.00 OBO
Duratrax Vendetta EP Buggy (Blue / Yellow Body) - Multiplex Permax Brushless BL-400/4D-3/2 motor, Ball diffs front and rear, aluminum shocks front and rear, Steel CVDs front and rear,
adjustable turnbuckles front and rear, aluminum front knuckles, aluminum wheel hexs front and rear, aluminum front upper suspension arm mount, carbon fiber servo hold down, carbon fiber chassis brace,
carbon fiber drive shaft, carbon fiber battery hold down, sway bars front and rear, aluminum shock stand offs front and rear, stock servo. - SOLD
Loads of spare parts including, 2 new in package Graphite chassis, new wing, new plastic CVDs, new drive shaft (not pictured), full set of ATM CVDs, new complete ball diff, ball diff rebuild kits (balls and rings),
many aluminum shocks, springs, 20 - 30 shock shafts, o rings and bladders, pinion and spur gears, aluminum knuckles and pivot balls, tons of screws and suspension parts.
There are enough spare parts (all new) to build another roller minus a bearing set. There is almost enough to build 2 rollers minus a few parts. Parts boxes are not included. SOLD
Sportwerks Recoil Pro Spashett Edition. Removed from box and has been sitting on a shelf since. Installed Hitec servo. Has never had any other electronics installed. Flawless, no scratches or damage. Body is perfect.
New in box set of 4 Purple and set of 4 Magenta foam tires. New unpainted body with window mask, wing and sticker set. Includes some spare new C hubs, hinge pin mounts, shock pistons and other parts.
Note that the stock rubber tires have a few cracks in them. - $150.00 OBO
2 Losi Micro T RTR. Both only driven around my office at work. Never broken or damaged. Comes with loads of spare parts including 2 motors, shocks, arms, pins, gears, dogbones, shock towers.
There are nearly enough parts to build two complete trucks minus the tubs. The only issue is the charging bricks. I had a can of Paragon traction compound spill on the shelf where they were
and it melted / softened up the plastic. I have since removed the battery covers from both bricks and both still charge fine. - SOLD
Eagle Racing comm lathe with Integy drive motor, drive belt and carbide cutting blade. - $40
Castle Creations Mamba Micro Pro - 1 used. - $50
Castle Creations Sidewinder Micro - 1 used. - SOLD
Castle Creations CM20-6800kv motor - 2 used - SOLD
Castle Creations Castle Link USB programming cable and software CD. - SOLD
Losi Xcelorin 9400KV motor - $40
Brand new Ammo 3900KV and 5100KV motors - $50.00 each
Team Associated RC18T2/B2 Factory Team - Built and never driven. Body is still unpainted. Associated servo installed. No scratches or damage. - SOLD
Team Assoicated RC18R - completely stock, has a few scratches on bottom, body posts uncut. No wheels / tires, but I have several sets to pick from if interested. - $50.00
Team Associated RC18T with 18R shock towers and short shocks. Rally foam tires and AE steel MIP CVDs. RPM front bumper and Hitec servo. Green and Orange body comes with this car. - $75.00
Team Associated Niteline and Kamino bodies in packages. $10.00 each
Team Associated RC18T body in package. $10.00
3 miscellaneous clear wings.
New RC18 chassis, new top plate, 2 used top plates, center shaft, battery strap and new steel turnbuckle set.
Tons of spare parts, 90% are new. 18T, 18B and 18R suspension arms, shock towers, complete shocks and shock bodies, springs, 20-30 shock rebuild parts including shafts, pistons, orings, bladders.
Complete ball diffs, diff balls, rings, screws, springs and gears, probably enough to rebuild or build 4 or 5 new ball diffs. Spur gears, dog bones and CVD parts. Several sets of new steel turnbuckles and cups.
Body posts, c hubs, knuckles and hub carriers. Gearbox cases (upper and lower), linkages, 3 motor mounts and loads of hardware. About 30 pinions and 2 sets of The Toys aluminum shocks. Parts boxes are not included. SOLD
Duratrax Vendetta ST Truck (Green Body) - Graphite Chassis, 3900KV Ammo brushless motor, Ball diffs front and rear, aluminum shocks rear, Steel CVDs front and rear, adjustable turnbuckles front, rear and steering,
stock servo, aluminum upper front arms, aluminum front knuckles, aluminum wheel hexs front and rear, aluminum front upper suspension arm mount, carbon fiber servo hold down, aluminum shock stand offs front and rear.
Indoor carpet raced only. Never driven outside so it is extremely clean. - $150.00 OBO
Duratrax Vendetta ST Truck (Red / Blue Body) - Graphite Chassis, 5100KV Ammo brushless motor, Ball diffs front and rear, aluminum shocks front, Steel CVDs front and rear, adjustable turnbuckles front, rear and steering,
stock servo, aluminum upper front arms, aluminum front knuckles, aluminum wheel hexs front and rear, aluminum front upper suspension arm mount, carbon fiber servo hold down, aluminum shock stand offs front and rear.
Indoor carpet raced only. Never driven outside so it is extremely clean. - $150.00 OBO
Duratrax Vendetta EP Buggy (Green / Yellow Body) - All stock with aluminum motor heatsink, carbon fiber servo hold down, adjustable turnbuckles front, rear and steering. - $100.00 OBO
Duratrax Vendetta EP Buggy (Blue / Yellow Body) - Multiplex Permax Brushless BL-400/4D-3/2 motor, Ball diffs front and rear, aluminum shocks front and rear, Steel CVDs front and rear,
adjustable turnbuckles front and rear, aluminum front knuckles, aluminum wheel hexs front and rear, aluminum front upper suspension arm mount, carbon fiber servo hold down, carbon fiber chassis brace,
carbon fiber drive shaft, carbon fiber battery hold down, sway bars front and rear, aluminum shock stand offs front and rear, stock servo. - SOLD
Loads of spare parts including, 2 new in package Graphite chassis, new wing, new plastic CVDs, new drive shaft (not pictured), full set of ATM CVDs, new complete ball diff, ball diff rebuild kits (balls and rings),
many aluminum shocks, springs, 20 - 30 shock shafts, o rings and bladders, pinion and spur gears, aluminum knuckles and pivot balls, tons of screws and suspension parts.
There are enough spare parts (all new) to build another roller minus a bearing set. There is almost enough to build 2 rollers minus a few parts. Parts boxes are not included. SOLD
Sportwerks Recoil Pro Spashett Edition. Removed from box and has been sitting on a shelf since. Installed Hitec servo. Has never had any other electronics installed. Flawless, no scratches or damage. Body is perfect.
New in box set of 4 Purple and set of 4 Magenta foam tires. New unpainted body with window mask, wing and sticker set. Includes some spare new C hubs, hinge pin mounts, shock pistons and other parts.
Note that the stock rubber tires have a few cracks in them. - $150.00 OBO
2 Losi Micro T RTR. Both only driven around my office at work. Never broken or damaged. Comes with loads of spare parts including 2 motors, shocks, arms, pins, gears, dogbones, shock towers.
There are nearly enough parts to build two complete trucks minus the tubs. The only issue is the charging bricks. I had a can of Paragon traction compound spill on the shelf where they were
and it melted / softened up the plastic. I have since removed the battery covers from both bricks and both still charge fine. - SOLD
Eagle Racing comm lathe with Integy drive motor, drive belt and carbide cutting blade. - $40
Castle Creations Mamba Micro Pro - 1 used. - $50
Castle Creations Sidewinder Micro - 1 used. - SOLD
Castle Creations CM20-6800kv motor - 2 used - SOLD
Castle Creations Castle Link USB programming cable and software CD. - SOLD
Losi Xcelorin 9400KV motor - $40
Brand new Ammo 3900KV and 5100KV motors - $50.00 each
Team Associated RC18T2/B2 Factory Team - Built and never driven. Body is still unpainted. Associated servo installed. No scratches or damage. - SOLD
Team Assoicated RC18R - completely stock, has a few scratches on bottom, body posts uncut. No wheels / tires, but I have several sets to pick from if interested. - $50.00
Team Associated RC18T with 18R shock towers and short shocks. Rally foam tires and AE steel MIP CVDs. RPM front bumper and Hitec servo. Green and Orange body comes with this car. - $75.00
Team Associated Niteline and Kamino bodies in packages. $10.00 each
Team Associated RC18T body in package. $10.00
3 miscellaneous clear wings.
New RC18 chassis, new top plate, 2 used top plates, center shaft, battery strap and new steel turnbuckle set.
Tons of spare parts, 90% are new. 18T, 18B and 18R suspension arms, shock towers, complete shocks and shock bodies, springs, 20-30 shock rebuild parts including shafts, pistons, orings, bladders.
Complete ball diffs, diff balls, rings, screws, springs and gears, probably enough to rebuild or build 4 or 5 new ball diffs. Spur gears, dog bones and CVD parts. Several sets of new steel turnbuckles and cups.
Body posts, c hubs, knuckles and hub carriers. Gearbox cases (upper and lower), linkages, 3 motor mounts and loads of hardware. About 30 pinions and 2 sets of The Toys aluminum shocks. Parts boxes are not included. SOLD
Last edited by kartracer; 04-13-2015 at 06:49 PM.
#9
#14
Suspended
Pm sent for minit, would like to get my sons started on minit's....