AVID XRAY T4 2014 chassis/top deck/shock towers
03-19-2015, 12:28 PM
#1
AVID XRAY T4 2014 chassis/top deck/shock towers
Excellent condition AVID XRAY T4 2014 chassis, top deck and front and rear shock towers(sorry the rear is in my bag so it missed the pics, but is included). This chassis is 2.0mm, but has a stiffer carbon weave than stock. It also has the holes drilled for ARS. No damage at all. Please read the specs below
$OLD
The Xray T4 '14 2mm Hard chassis is made from 100% premium carbon fiber which utilizes a varying angle layup to provide an uncanny resistance to flexing / twisting. It is noticeably stiffer than a 2.25mm chassis that comes with touring car kits today. We recommend using this chassis to increase performance on medium to high bite track conditions.
Details
100% Premium carbon fiber with a varying angle layup to increase stiffness.
Cut with layup angles balanced left and right to insure equal twisting resistance side to side.
2mm thickness allows for lower CG and ability to lower roll centers more than stock.
Chassis shape is smoothed to keep droop screw platforms from digging into the track during hard cornering.
Chassis narrowed to 84mm allowing the chassis to roll deeper through a corner.
Includes holes for the soon to be released ARS system.
Recommend for use on medium to high bite conditions.
$OLD
The Xray T4 '14 2mm Hard chassis is made from 100% premium carbon fiber which utilizes a varying angle layup to provide an uncanny resistance to flexing / twisting. It is noticeably stiffer than a 2.25mm chassis that comes with touring car kits today. We recommend using this chassis to increase performance on medium to high bite track conditions.
Details
100% Premium carbon fiber with a varying angle layup to increase stiffness.
Cut with layup angles balanced left and right to insure equal twisting resistance side to side.
2mm thickness allows for lower CG and ability to lower roll centers more than stock.
Chassis shape is smoothed to keep droop screw platforms from digging into the track during hard cornering.
Chassis narrowed to 84mm allowing the chassis to roll deeper through a corner.
Includes holes for the soon to be released ARS system.
Recommend for use on medium to high bite conditions.
Last edited by bigwavedave33; 04-12-2015 at 12:34 PM.
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
