fs: vista power ac dc quad multi battery charger ( like hitec x4 but more powerful )

Reply Subscribe

Thread Tools

Search this Thread

11-21-2014, 08:24 AM

paulfromtulsa

Tech Adept

Thread Starter

iTrader: (37)

Join Date: Nov 2012

Posts: 242

Trader Rating: 37 (97%+)

fs: vista power ac DC lipo multi battery charger ( like hitec x4 but more powerful )

i have a like new vista power ac/dc charger for sale. this charger is like the hitec quad charger but more powerful. this charger is 320 watts and will charge up to 7 amps per port. i listed the specs below. 918-557-7285 for faster response. $160 shipped

This is the EV-Peak Four Port Quad Charger, 110V-120V Version.

Convenience:
Charge FOUR batteries at once! Even if they are not the same chemistry, voltage, or capacity. This charger has 4 individual charge ports and plugs directly into the wall. It also can be connected to a DC power source such as a 12V car battery or a DC Power Supply.
The Charger also features LiPo Balance Charge, LiPo Storage, and LiPo Discharge modes.

High Power:
The Q320AC can output up to 80Watts/7Amps from each port at the same time! Each port is fully independent of each other and has its own dedicated power! Using 80Watts/7Amps on a port in no way limits any of the other ports' ability to charge to its full potential! Max the charger out by using 80Watts/7Amps on each port at the same time for a total of 320Watts!

Reliability:
EV-Peak is known for their great reliability. They use the best internal components and circuitry available to create long lasting products. Their reliability rivals that of name brand manufacturers such as Hitec, Duratrax, Traxxas, etc. And all this is backed by an easy 1 year warranty!

High Power Output:
This charger boasts 80Watts of power per port! Most chargers such as Hitec only offer 50Watts per channel. But this charger leaves them all in the dust, allowing your packs to charge faster! It offers a 7Amp charge rate!

Digital Power Mode
Each Port can act as a power supply! Use this function to power external items such as a pit light, tire truer, motor checker, charger, or anything else that runs off of DC power. Both the Voltage and Amperage are adjustable to suit the needs of the connected device.
Lithium Cell Check
Check the voltage of a Lithium battery's cells when plugged into the balance port. Simply hold the INC button when in a Lithium menu. The screen will provide a readout of each cell’s voltage.
Menu Options:

LiPo Battery, LiIon Battery, LiFe Battery
Charge
Balance Charge (Balances cells inside of battery for optimal performance & safety)
Storage Mode (Brings battery to approx. half charge, best for long term non-use)
Discharge (Final Cell Voltage is Adjustable. LiPo 3.0V-4.0V. LiIo 3.0V-4.0V. LiFe 2.0V-3.0V)
NiMh
Manual Charge (Manually set charge amperage)
Auto Charge (Set amperage limit, charger will auto adjust)
Discharge (Voltage adjustable from 0.1V-24.0V)
Cycle (Cycle Charge/Discharge or Discharge/Charge up to 5 times)
NiCd
Manual Charge (Manually set charge amperage)
Auto Charge (Set amperage limit, charger will auto adjust)
Discharge (Voltage adjustable from 0.1V-24.0V)
Cycle (Cycle Charge/Discharge or Discharge/Charge up to 5 times)
Pb (Lead Acid batteries such as the battery in your car)
Charge
Discharge
Digital Power
Use this function to power external items such as a pit light, tire truer, motor checker, charger, or anything else that runs off of DC power.
Amperage adjustable from 0.1A-7.0A
Voltage Adjustable from 3.0V-24.0V
User Settings
Precharge Time
Wait Time (between charge & discharge cycles, 1-60min)
NiMh Peak Sensitivity
NiCd Peak Sensitivity
Temp Cutoff
Safety Timer
Capacity Cutoff
Input Power Low Voltage Cutoff
Key Beep and Buzzer Sound (On or Off)
Back Light (0%-100%)
Factory Reset

Attached Thumbnails