Brushless E-Maxx FS/FT
10-16-2014, 03:08 PM
#1
Brushless E-Maxx FS/FT
Well, I guess I am considering getting rid of my Emaxx. It is an amazing truck, and was a blast to build. I won the Pro-Line Readers's Rides for August 21st with it. http://www.prolineracing.com/blog/20...des-winner-17/ I don't HAVE to get rid of it, so I will be EXTREMELY picky on price, as well as trades. I am starting out at $650 shipped.
Check lower in the post for things I may trade for.
Make me offers though... Just because it is priced high, doesn't mean I won't take less!
EVERYTHING is basically brand new on it.
-Pro-Line Dodge 1500 body (their new release) painted by me.
-Pro-Line Ridge-Line bumper set
-Pro-Line Trencher 3.8" 40 series on Tech 5 Zero rims
-Traxxas 17mm adapters
-Traxxas steel CVD drive shafts
-Traxxas steel CVD center drive shafts
-Traxxas wheelie bar
-Traxxas aluminum wheelie bar wheels
-Traxxas springs (4)
-RC Haven dual rate springs (4)
-Traxxas big bore shocks
-Team Associated 55 weight shock fluid
-Traxxas 2075 servos (2)
-Traxxas TQi 2.4 radio system
-Tacon 2150kv motor
-Castle fan for the motor
-Hobbywing SC8 WP speed control (waterproof)
-24/68 gearing (pinion is from a MMM motor)
-Turnigy 2s 5000mAh 25C-50C x2 deans
-Turnigy 2s 5000mAh 60C-120C x2 deans
That is about all that is installed on it I think! I will double check later tonight when I am home. I know I will have a pile of spare parts to go with such as...
-Yellow Jeep body, not perfect, but not in bad shape either (I can get pictures of it)
-stock wheels and tires (one has torn off the bead a little)
-Bad Horsie shock covers
-stock outer drive shafts
-1 new differential, 1 used still good differential, and one that needs rebuilt. (Bearing blew out, and input shaft I think stripped out. Haven't taken it apart to investigate, just bought new ones.)
-RC Screws kit. I think they are all in there. I only took the plastic wrap off of it.
-4 Traxxas big bore shocks, 4 RC haven dual rate shocks
-8 Traxxas stock shocks
-All 4 stock hex's, pins, and wheel nuts
-3 bags of shock parts, spacers, clips, a rebuild kit or two, and a shock body
-brand new front bumper, and mounting brackets
-used front bumper
-used rear bumper
-battery spacer
-hinge pins
-new front and rear body post tower
-used wheelie bar, lost one of the wheels doing a wheelie. So, just bought the new wheelie bar and aluminum wheels
-new knucle
-new A-arm
-new hinge pins I think there is approximately 3 sets left
-new clutch rebuild kit
-new 68T spur x2
-new 62T spur
-new 66T spur
-new 3 pinions (forgot to look at sizes, but they are for this motor setup, and for a emaxx.)
This truck is a flat beast, and hauls! I clocked it at 50mph with my phone strapped to it. I'm just looking to get into something a little cheaper, or get rid of it altogether. I would take trades for a few mini revos, maybe a brushless revo, who knows surprise me!
Again, this is starting out at $650 shipped. Make me reasonable offers, trade offers, etc. If you are local, I might do FOID trades as well if you are local.
Alright now here are the pictures of the extras, as well as some pictures of the inside of the rig. Again, make offers, but don't be offended when or if I turn them down. A LOT of time and money has went into this truck.
Now for all of the extras
Check lower in the post for things I may trade for.
Make me offers though... Just because it is priced high, doesn't mean I won't take less!
EVERYTHING is basically brand new on it.
-Pro-Line Dodge 1500 body (their new release) painted by me.
-Pro-Line Ridge-Line bumper set
-Pro-Line Trencher 3.8" 40 series on Tech 5 Zero rims
-Traxxas 17mm adapters
-Traxxas steel CVD drive shafts
-Traxxas steel CVD center drive shafts
-Traxxas wheelie bar
-Traxxas aluminum wheelie bar wheels
-Traxxas springs (4)
-RC Haven dual rate springs (4)
-Traxxas big bore shocks
-Team Associated 55 weight shock fluid
-Traxxas 2075 servos (2)
-Traxxas TQi 2.4 radio system
-Tacon 2150kv motor
-Castle fan for the motor
-Hobbywing SC8 WP speed control (waterproof)
-24/68 gearing (pinion is from a MMM motor)
-Turnigy 2s 5000mAh 25C-50C x2 deans
-Turnigy 2s 5000mAh 60C-120C x2 deans
That is about all that is installed on it I think! I will double check later tonight when I am home. I know I will have a pile of spare parts to go with such as...
-Yellow Jeep body, not perfect, but not in bad shape either (I can get pictures of it)
-stock wheels and tires (one has torn off the bead a little)
-Bad Horsie shock covers
-stock outer drive shafts
-1 new differential, 1 used still good differential, and one that needs rebuilt. (Bearing blew out, and input shaft I think stripped out. Haven't taken it apart to investigate, just bought new ones.)
-RC Screws kit. I think they are all in there. I only took the plastic wrap off of it.
-4 Traxxas big bore shocks, 4 RC haven dual rate shocks
-8 Traxxas stock shocks
-All 4 stock hex's, pins, and wheel nuts
-3 bags of shock parts, spacers, clips, a rebuild kit or two, and a shock body
-brand new front bumper, and mounting brackets
-used front bumper
-used rear bumper
-battery spacer
-hinge pins
-new front and rear body post tower
-used wheelie bar, lost one of the wheels doing a wheelie. So, just bought the new wheelie bar and aluminum wheels
-new knucle
-new A-arm
-new hinge pins I think there is approximately 3 sets left
-new clutch rebuild kit
-new 68T spur x2
-new 62T spur
-new 66T spur
-new 3 pinions (forgot to look at sizes, but they are for this motor setup, and for a emaxx.)
This truck is a flat beast, and hauls! I clocked it at 50mph with my phone strapped to it. I'm just looking to get into something a little cheaper, or get rid of it altogether. I would take trades for a few mini revos, maybe a brushless revo, who knows surprise me!
Again, this is starting out at $650 shipped. Make me reasonable offers, trade offers, etc. If you are local, I might do FOID trades as well if you are local.
Alright now here are the pictures of the extras, as well as some pictures of the inside of the rig. Again, make offers, but don't be offended when or if I turn them down. A LOT of time and money has went into this truck.
Now for all of the extras
10-23-2014, 05:46 AM
#4
Stampede 4x4 w/ lcg slash kit + strc aluminum motor mount , strc e-buggy kit , rpm a arms rpm front bumper castle 3800kv and hobbywing 60a esc
12-25-2014, 09:45 AM
#11
whats the price you are looking for now?
12-29-2014, 10:34 PM
#12
Is it still available?
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
