LRP X20 ★ Reedy Sonic ★ Tekin RS Pro ★ Orion R10 Pro
#1
LRP X20 ★ Reedy Sonic ★ Tekin RS Pro ★ Orion R10 Pro
Since I won't be getting into off-road like I planned because of a tight budget, I really don't have much use currently for these items.
LRP X20 6.5 turn w/optional aluminum end cap. Practically new, this motor is a beast and it is by no means cheap. No road rash, no dents and no scratches. Very clean. *TRADED*
Reedy Sonic 13.5 turn. Awesome motor for the 2wd truck. Super clean with only minor scuffs on the bottom, far from what you've come to expect on these threads. Motor is spotless inside and out, Bearings were blasted and oiled before storage which means the entire motor was disassembled, cleaned, shimmed and stored. *TRADED*
Orion R10 Pro. Missing housing for switch. I can shrink wrap it if it'll make you feel better .. Very clean and soooo smooth, the girls can't get enough! I removed the soldering tabs for the wires, they are useless and add resistance. The holes are clean, prepped and read to solder wire directly to the ESC. For the right trade, ill even solder wires on before I ship it.
Tekin RS Pro. Soldered but never used, it was suppose to be a backup. Might end up keeping this one since its new but I wanted to offer up. Comes with Tekin Hotwire for programming. Yes, I have a cap I can solder on.
All of these items are up for trade. I'm looking for a number of items for on road. Will trade for other ESC's, 21.5 motors.. Transponders will work too, maybe a nice KoPropo servo.. Make me an offer for trade..
LRP X20 6.5 turn w/optional aluminum end cap. Practically new, this motor is a beast and it is by no means cheap. No road rash, no dents and no scratches. Very clean. *TRADED*
Reedy Sonic 13.5 turn. Awesome motor for the 2wd truck. Super clean with only minor scuffs on the bottom, far from what you've come to expect on these threads. Motor is spotless inside and out, Bearings were blasted and oiled before storage which means the entire motor was disassembled, cleaned, shimmed and stored. *TRADED*
Orion R10 Pro. Missing housing for switch. I can shrink wrap it if it'll make you feel better .. Very clean and soooo smooth, the girls can't get enough! I removed the soldering tabs for the wires, they are useless and add resistance. The holes are clean, prepped and read to solder wire directly to the ESC. For the right trade, ill even solder wires on before I ship it.
Tekin RS Pro. Soldered but never used, it was suppose to be a backup. Might end up keeping this one since its new but I wanted to offer up. Comes with Tekin Hotwire for programming. Yes, I have a cap I can solder on.
All of these items are up for trade. I'm looking for a number of items for on road. Will trade for other ESC's, 21.5 motors.. Transponders will work too, maybe a nice KoPropo servo.. Make me an offer for trade..
Last edited by M3Roc; 10-22-2014 at 03:23 PM.
#3
Brother, you've been a pleasure to trade and converse with!
For those interested in any of the above, here is what im after;
Transponders. Both MRT and MyLaps 2-wire.
Hobbywing Xerun V3.1 1s Speedo.
21.5 Motors.
Futaba R614FF-E Receiver.
Make an offer, text me if you're interested.
585 ★ 645 ★ 4941
For those interested in any of the above, here is what im after;
Transponders. Both MRT and MyLaps 2-wire.
Hobbywing Xerun V3.1 1s Speedo.
21.5 Motors.
Futaba R614FF-E Receiver.
Make an offer, text me if you're interested.
585 ★ 645 ★ 4941
#6
Text sent.
#8
Great guy to deal with! Very thorough on his trades, deal with this guy in confidence!
#12
Tech Rookie
do you stell have the tekin esc ??