Serpent Spyder SRX2 Rear Motor Buggy, Tekin ESC 13.5 Gen 2, KO Propo RSX Servo, Lipos
#1
Serpent Spyder SRX2 Rear Motor Buggy, Tekin ESC 13.5 Gen 2, KO Propo RSX Servo, Lipos
Selling out, everything has to go. No time for RC anymore.
I have a lot of stuff for sale- if you want a lot of things together send me a PM and I will give you a discounted quote.
Please Check out my Mid Motor Car as well: http://www.rctech.net/forum/r-c-item...-upgrades.html
This is my Serpent SRX-2 Spyder Rear Motor 2wd Buggy. The car was built, and then ran for maybe 3 race days and never touched again. It's in great shape- Ball diff was expertly built and broken in- has BFASt rings, carbide main diff balls, and ceramic thrust bearings. Nice and smooth. The upper bulkhead cracked- I epoxied it together and it held so i never bothered to change it. However I do have an updated chassis and bulkhead which solved the original problem, they are included. Also had a front shock shaft break off- so I bothered an associated b4 shock shaft, which pretty much dropped in. I am including a brand new front pair of shock shafts, nuts, and the shock assembly pieces so that can be rebuilt new as well.
Other than that the car is in great shape- I used kyosho x-rings in the shocks, and a losi 22 aluminum steering arm (some shaving was required- the stock steering arms are included too for the new chassis and bulkhead). Has extra orings, turnbuckle ends, a hitec servo, ball diff internals, bumper, pistons, front and rear arms, front shock springs, etc etc. (actual parts bins not included). Including 2 extra wings, 3 sets of rear clay tires (2 sets of barcodes, 1 rebar) in good shape, and a near new set of front clay bar codes.
Body is in fantastic shape, all white and backed entirely with shoe goo. Will last forever.
SOLD
As far as electronics- (See above for pics!)
Tekin RS ESC. Works great, has switch. SOLD
Tekin RS 13.5 Motor. Used, but works awesome. Never overheated, still very fast and lots of power. $50 shipped
Tekin RS Gen 2 13.5 Motor. 1 Weekend on it, pretty much brand new. $75 shipped
Tekin Hotwire: $20 shipped
3 Sensor Wires: $15 shipped
KO Propo RSX Low Profile Servo. Used But Works Great. $65 shipped
3 Lipo Batteries:
2 Protek 5000mah 35C- both work and balance perfect. They have different cases. The other is a Venom 500mah 60C. Also works and Balances Perfectly.
$85 shipped for all of them
BFAST Diff Parts: $32.50 shipped (save $8 from BFAST's site)
-Basically a Pro Driver's Kit and an extra set of main carbide diff balls.
2 sets of 12 (24 Total) BFAST Carbide Main Diff Balls
1 Set of BFAST Diff Rings:
1 Set of BFAST Ceramic thrust Balls And Treated Washers
I also have a variety of spares for sale, all brand new in bag. 25-35% off retail. I will only sell things in semi-large groups of parts, I don't want to be nickel and dimed on a bunch of shipping charges. Over $25 at least to ship anything. If you want all the spares (BFAST, Brass, and other Serpent Parts) $150 shipped
1x SER500250 Brass Front Bulkhead $30.00
1x SER500285 Brass Mid Motor ballast Weight $30.00
--$55 shipped for both brass pieces
1x SER500173 Ball Diff Thrust Set $2.50
1x SER500171 Ball Diff Spring Set of 2 $3.50
2x SER500185 Diff botom Oring Set of 4 $5.00 for both
1x SER110449 Shim Set 3x6x1 (10) $10.00
1x SER500238 Shock Piston Conical 2 Holes (4) $12.50
1x SER500150 Pivotball w/ Long Shaft (4) $7.50
1x SER500215 76T Spur Gear $5.00
1x SER600216 78T Spur Gear $5.00
1x SER500224 Orange Front Shock Springs 2.87 lbs $5.00
1x SER500225 Red Front Shock Springs 3.0 lbs $5.00
1x SER500227 Blue Front Shock Springs 3.4 lbs $5.00
1x SER500230 Orange Rear Shock Springs 2.0 lbs $5.00
1x SER500233 Blue Rear Shock Springs 2.3 lbs $5.00
1x SER500234 Purple Rear Shock Springs 2.4 lbs $5.00
--$75 Shipped for all the other serpent parts together
I also have a lot of wheels and tires. All tires are clay compounds.
2 pairs of Yellow Front Serpent Wheels, 1 set of Yellow Rear AKA wheels: $20
1 Set of White Front Serpent Wheels, and 1 Pair of White Rear Serpent Wheels: $12.50
$30 for all of them.
1 set of Brand New Front AKA Handlebars. Come with a set of front and rear open celled foams, so use whichever you prefer. $7.50
1 set of Brand New Front AKA Handlebars Mounted on Yellow Serpent Wheels. Rear Open celled foam stuffed in. $15
1 set of 99% Front JCONCEPTS Barcodes on White Serpent Wheels. Stuffed Rear Open cell Inserts. Run for 5 minutes. $15
1 Set of Brand New Rear AKA Handlebars Mounted on Yellow AKA Wheels. Red Closed Cell Insets: $15
1 Set of 99% Rear JCONCEPTS v1 Barcodes Mounted on White Serpent Wheels. Red AKA Closed Cell Inserts. Run for 5 minutes. $15
1 set of 95% Rear JCONCEPTS Pressure Points on Yellow AKA Wheels. Red Closed Cell AKA Inserts. Maybe 10 minutes run time. $15
Tire Foam Lot: 6 Sets of Brand New Trinity/Epic Bomb One 1521 2wd Rear Foam pairs. These are pretty much the only good Open Cell Foams ever made. Ryan Maifield actually helped me trim each of them perfectly last year. Great for rear tires, but also cutting down to front size and using them up front. Either or! Very rare nowadays. Also have two pairs of front stock open cell foams and 1 pair of rears. $35 shipped.
I have a lot of stuff for sale- if you want a lot of things together send me a PM and I will give you a discounted quote.
Please Check out my Mid Motor Car as well: http://www.rctech.net/forum/r-c-item...-upgrades.html
This is my Serpent SRX-2 Spyder Rear Motor 2wd Buggy. The car was built, and then ran for maybe 3 race days and never touched again. It's in great shape- Ball diff was expertly built and broken in- has BFASt rings, carbide main diff balls, and ceramic thrust bearings. Nice and smooth. The upper bulkhead cracked- I epoxied it together and it held so i never bothered to change it. However I do have an updated chassis and bulkhead which solved the original problem, they are included. Also had a front shock shaft break off- so I bothered an associated b4 shock shaft, which pretty much dropped in. I am including a brand new front pair of shock shafts, nuts, and the shock assembly pieces so that can be rebuilt new as well.
Other than that the car is in great shape- I used kyosho x-rings in the shocks, and a losi 22 aluminum steering arm (some shaving was required- the stock steering arms are included too for the new chassis and bulkhead). Has extra orings, turnbuckle ends, a hitec servo, ball diff internals, bumper, pistons, front and rear arms, front shock springs, etc etc. (actual parts bins not included). Including 2 extra wings, 3 sets of rear clay tires (2 sets of barcodes, 1 rebar) in good shape, and a near new set of front clay bar codes.
Body is in fantastic shape, all white and backed entirely with shoe goo. Will last forever.
SOLD
As far as electronics- (See above for pics!)
Tekin RS ESC. Works great, has switch. SOLD
Tekin RS 13.5 Motor. Used, but works awesome. Never overheated, still very fast and lots of power. $50 shipped
Tekin RS Gen 2 13.5 Motor. 1 Weekend on it, pretty much brand new. $75 shipped
Tekin Hotwire: $20 shipped
3 Sensor Wires: $15 shipped
KO Propo RSX Low Profile Servo. Used But Works Great. $65 shipped
3 Lipo Batteries:
2 Protek 5000mah 35C- both work and balance perfect. They have different cases. The other is a Venom 500mah 60C. Also works and Balances Perfectly.
$85 shipped for all of them
BFAST Diff Parts: $32.50 shipped (save $8 from BFAST's site)
-Basically a Pro Driver's Kit and an extra set of main carbide diff balls.
2 sets of 12 (24 Total) BFAST Carbide Main Diff Balls
1 Set of BFAST Diff Rings:
1 Set of BFAST Ceramic thrust Balls And Treated Washers
I also have a variety of spares for sale, all brand new in bag. 25-35% off retail. I will only sell things in semi-large groups of parts, I don't want to be nickel and dimed on a bunch of shipping charges. Over $25 at least to ship anything. If you want all the spares (BFAST, Brass, and other Serpent Parts) $150 shipped
1x SER500250 Brass Front Bulkhead $30.00
1x SER500285 Brass Mid Motor ballast Weight $30.00
--$55 shipped for both brass pieces
1x SER500173 Ball Diff Thrust Set $2.50
1x SER500171 Ball Diff Spring Set of 2 $3.50
2x SER500185 Diff botom Oring Set of 4 $5.00 for both
1x SER110449 Shim Set 3x6x1 (10) $10.00
1x SER500238 Shock Piston Conical 2 Holes (4) $12.50
1x SER500150 Pivotball w/ Long Shaft (4) $7.50
1x SER500215 76T Spur Gear $5.00
1x SER600216 78T Spur Gear $5.00
1x SER500224 Orange Front Shock Springs 2.87 lbs $5.00
1x SER500225 Red Front Shock Springs 3.0 lbs $5.00
1x SER500227 Blue Front Shock Springs 3.4 lbs $5.00
1x SER500230 Orange Rear Shock Springs 2.0 lbs $5.00
1x SER500233 Blue Rear Shock Springs 2.3 lbs $5.00
1x SER500234 Purple Rear Shock Springs 2.4 lbs $5.00
--$75 Shipped for all the other serpent parts together
I also have a lot of wheels and tires. All tires are clay compounds.
2 pairs of Yellow Front Serpent Wheels, 1 set of Yellow Rear AKA wheels: $20
1 Set of White Front Serpent Wheels, and 1 Pair of White Rear Serpent Wheels: $12.50
$30 for all of them.
1 set of Brand New Front AKA Handlebars. Come with a set of front and rear open celled foams, so use whichever you prefer. $7.50
1 set of Brand New Front AKA Handlebars Mounted on Yellow Serpent Wheels. Rear Open celled foam stuffed in. $15
1 set of 99% Front JCONCEPTS Barcodes on White Serpent Wheels. Stuffed Rear Open cell Inserts. Run for 5 minutes. $15
1 Set of Brand New Rear AKA Handlebars Mounted on Yellow AKA Wheels. Red Closed Cell Insets: $15
1 Set of 99% Rear JCONCEPTS v1 Barcodes Mounted on White Serpent Wheels. Red AKA Closed Cell Inserts. Run for 5 minutes. $15
1 set of 95% Rear JCONCEPTS Pressure Points on Yellow AKA Wheels. Red Closed Cell AKA Inserts. Maybe 10 minutes run time. $15
Tire Foam Lot: 6 Sets of Brand New Trinity/Epic Bomb One 1521 2wd Rear Foam pairs. These are pretty much the only good Open Cell Foams ever made. Ryan Maifield actually helped me trim each of them perfectly last year. Great for rear tires, but also cutting down to front size and using them up front. Either or! Very rare nowadays. Also have two pairs of front stock open cell foams and 1 pair of rears. $35 shipped.
Last edited by Muggydude; 08-05-2014 at 03:59 PM.
#2
Have PM you about the Servo - Would like to take it Thanks