>>> XRAY NT1 2013 PICCO MATRIX PARTS <<<
07-04-2014, 12:10 PM
#1
>>> XRAY NT1 2013 PICCO MATRIX PARTS <<<
FOR SALE:
Two brand new Picco 2669 pipes #7166 (no manifolds) = $75 shipped for both
Brand new Matrix 1/10 sedan foam tires = SOLD
5 sets - 32º Front Carbon
2 sets - 35º Front Carbon
2 sets - 37º Front Carbon
5 sets - 37º Rear Carbon
2 sets - 40º Rear Carbon
2 sets - 42º Rear Carbon
Used XRAY NT1 2013 Spec roller with Picco = SOLD
This sedan was built and used at the end of last year. It includes an used Picco Torque .12 EM EDO X mod, Picco 2669 pipe and manifold. This engine was basically broken-in and raced once. The chassis has a few hop-ups like front diff (200000wt), metallic brake pads, CF bumper brace, red clutch shoe, battery connector on outside of transmitter box, etc. This chassis comes with manual, set of Matrix tires and the a few basic spares. Pictured spares below are NOT included.
Make an offer for roller with Picco, pipes, tires and parts...ya never know!
Brand new 2013 Picco Torque .12 EM EDO X mod #9048 = SOLD
Factory sealed box.
Xray NT1 parts lot = SOLD
1 - 333310 Rear upright V2
2 - 332210 Right steering block V2
1 - 332220 Left steering block V2
1 - 332010 Right front bulkhead
1 - 332020 Left front bulkhead
2 - 333110 Rear lower arm V2
2 - 332111 Front lower arm narrow
2 - 333080 Shock tower 3mm V2
1 - 331215 Graphite Bumper brace
2 - 301322 Front body posts
2 - 301333 Rear body posts
2 - 335050 Rear gear diff sets
1 - 972050 O-rings
1 - 971240 O-rings
2 - 302655 Ball ends 10mm
1 - 338523 23T pinion
1 - 338517 17T pinion
1 - 335885 25t pulley
1 - 335810 20t pulley
1 - 335859 19t pulley
1 - 335828 18t pulley
1 - 335800 Pulley cover set
1 - 331201 Wide front bumper
1 - 335441 Side belt
1 - 335450 Rear belt
1 - 335430 Front belt
1 - 338084 3S spring set 5.0
PayPal only. No trades or shipping outside USA. Post PMs.
Two brand new Picco 2669 pipes #7166 (no manifolds) = $75 shipped for both
Brand new Matrix 1/10 sedan foam tires = SOLD
5 sets - 32º Front Carbon
2 sets - 35º Front Carbon
2 sets - 37º Front Carbon
5 sets - 37º Rear Carbon
2 sets - 40º Rear Carbon
2 sets - 42º Rear Carbon
Used XRAY NT1 2013 Spec roller with Picco = SOLD
This sedan was built and used at the end of last year. It includes an used Picco Torque .12 EM EDO X mod, Picco 2669 pipe and manifold. This engine was basically broken-in and raced once. The chassis has a few hop-ups like front diff (200000wt), metallic brake pads, CF bumper brace, red clutch shoe, battery connector on outside of transmitter box, etc. This chassis comes with manual, set of Matrix tires and the a few basic spares. Pictured spares below are NOT included.
Make an offer for roller with Picco, pipes, tires and parts...ya never know!
Brand new 2013 Picco Torque .12 EM EDO X mod #9048 = SOLD
Factory sealed box.
Xray NT1 parts lot = SOLD
1 - 333310 Rear upright V2
2 - 332210 Right steering block V2
1 - 332220 Left steering block V2
1 - 332010 Right front bulkhead
1 - 332020 Left front bulkhead
2 - 333110 Rear lower arm V2
2 - 332111 Front lower arm narrow
2 - 333080 Shock tower 3mm V2
1 - 331215 Graphite Bumper brace
2 - 301322 Front body posts
2 - 301333 Rear body posts
2 - 335050 Rear gear diff sets
1 - 972050 O-rings
1 - 971240 O-rings
2 - 302655 Ball ends 10mm
1 - 338523 23T pinion
1 - 338517 17T pinion
1 - 335885 25t pulley
1 - 335810 20t pulley
1 - 335859 19t pulley
1 - 335828 18t pulley
1 - 335800 Pulley cover set
1 - 331201 Wide front bumper
1 - 335441 Side belt
1 - 335450 Rear belt
1 - 335430 Front belt
1 - 338084 3S spring set 5.0
PayPal only. No trades or shipping outside USA. Post PMs.
Last edited by sohlman; 07-07-2014 at 11:30 AM.
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
