Nealkot

iTrader: (11)

SOLDToday I am selling my SCTE (1.0) short course truck. The truck is running a Tekin Pro4 4600 motor, RX 8 speed control (gen 1), and Savox 1268SG servo. It has been raced and practiced at Dirtburnrers my local track since I bought it. The truck is fully upgraded with every option part you would want for mod racing (see list below). It also is completely clean, and sprayed with RC Xtreme Kleen (a great product to keep dust and grime from building up, that is safe for electronics). I'm trying to sell it as a package deal, but if that fails, I'll consider parting things out. Comes with tons of spares, a lot NIP, and it's really everything you need to get into the pro4 class, all you need is: rx/tx, and 2s batteries. This truck is a great performer on the track and a joy to drive, but I lost my job and am only going to race two classes now, so I have to sell this. Here's a list of option parts installed, followed by a list of spares, and everything you get with the truck:

Option parts installed on the truck:

-front and rear HD lightened outdrive set LOSB 3575 (x2)
-center HD lightened outdrive set LOSB 3576
-TLR tuned flex lightened chassis LOSB 4000
-rear torque rod set LOSB 2426
-aluminum rear hub set LOSB 2130
-TLR aluminum rear gearbox bearing insert set TLR 3100
-aluminum clamping wheel hex set LOSB 3493 (x2)
-4mm carbon front shock tower LOSB 2173
-4mm carbon rear shock tower LOSB 2172
-hard anodized pivot ball set LOSB 2187
-TLR bleeder shock cap set TLR 5062 (x2)
-front shock spring tuning set LOSB 2959
-rear shock spring tuning set LOSB 2963
-TLR Ti Nitride hinge pin set TLR 6080
-TLR titanium king pin set TLR 6081
-TLR hard anodized servo saver tube TLR 4004
-aluminum shock collar set LOSB 2908 (x2)
-hard anodized front shock body set LOSB 2833
-hard anodized rear shock body set LOSB 2834
-adjustable front hinge pin holder set LOSB 4112
-adjustable rear hinge pin holder set
LOSB 4113
-King Headz center diff upright w/dual bearing KHZ SCTE 035
-King Headz motor mount w/dual bearing KHZ SCTE 036
-King Headz center diff top plate KHZ SCTE 025
-King Headz upper steering plate KHZ SCTE 010
-King Headz upper servo saver arm KHZ SCTE 065
-Tekno RC HD center drive shaft, front TKR 2213
-Tekno RC HD center drive shaft, rear TKR 2217
-Lunsford punisher titanium turnbuckle kit LNS 2515
-DE Racing XD rear skid plate DER 310 L
-RPM rear bumper mount RPM 73312
-RPM rear bumper RPM 73112
-RPM front arms RPM 73262
-RPM rear arms RPM 73142
-Jconcepts serrated wheel nuts, black

NIP parts and spares included in this sale:

-Tony's Screws screw kit (I might have used six or eight screws from it)
-shock collar plastics set LOSB 2904, NIP
-body posts LOSB 2414 (I used one post)
-front/rear racing springs LOSB 2959, LOSB 2963. (The missing ones are on the truck)
-King Headz RPM sensor mount KHZ SCTE 024, NIP
-DE Racing rear skid plates, 2 NIP, one new one on the truck
-also comes with all the plastics and original stock parts I replaced with hop ups, see pics. Including a complete spare rear diff, complete set of built stock shocks with aluminum collars, spare used rear drive shaft with King Headz coupler on it, the stock turnbuckles with rod ends still installed, spare set of green serrated wheel nuts, optional aluminum rear chassis brace, spare used full steering rack/servo saver...
- you will also get the manual for the truck, with a setup sheet that has the current set up on it. It's set up for indoor clay. I will throw in the instructions for the King Headz stuff and the RX 8 speedo as well.
-the body is a TLR high performance pre cut body TLR 8061. It's pretty well used, but still useable. You will want to replace it soon, and maybe just because it's pink!

WHEELS/TIRES:

You will get three sets (of 4) of tires with this sale. All mounted to black DE rims, all clay compound:

-Panther Rattlers, yellow Panther foams, NEW, glued, never even mounted
-Proline Ions, blue closed cell foams, 50% tread
-Panther Rattlers, yellow Panther foams, 2- 50% tread, 2-almost bald

As you have read, I have put a lot of effort into making this a true racing machine. And almost as much putting this book of an ad together! If you have any questions, or want a specific picture, shoot me a pm. I will try to respond quickly. Everything listed above is yours for SOLD (paypal only), shipped (CONUS only).
I will ship via us mail the business day following payment, and provide a tracking number. The price is less than half of what I have put into this truck, and I believe it's fair. Please don't send me low ball offers. I'm not looking for any trades either, so please refrain from offering any. Thanks for looking at my thread, I tried to make it as complete as possible. Hit me up with any questions.

Best,
Neal

Nealkot

iTrader: (11)

more pics...

Nealkot

iTrader: (11)

more pics....
can only download 5 at a time...

Nealkot

iTrader: (11)

last set of pics...

styme 44.2

iTrader: (1)

BUMP for Neal! cool dude right here. I drove this truck personally a few times and its great. He always has his gear in top notch condition. There will be no surprises with this sale.

Nealkot

iTrader: (11)

Thanks Wayne! Here's my daily bump.

lobuzz311

iTrader: (22)

Damn. That's a nice truck. GLWS, dude!

Nealkot

iTrader: (11)

Thanks lobuzz311! I think so too. Price drop super bump, $560.

monster245

any chance to make a deal? very interested!！！！！

Ck_32

iTrader: (2)

Sold to me!

Thanks again Neil. Great seller, stellar communication, awesome RCer. Can't wait to get this truck and hit the track!