CRC FK05 and LOSI for sale
#1
CRC FK05 and LOSI for sale
Up for sale is a CRC 3.1 Carpet knife red edition that was ran mostly on carpet and 3 times on asphalt. Minor scratches on bottom. Will include painted body, Fantom Killer volts 4 cell pack, servo, and monster stock motor. As well as some extra springs and front end parts and roll center adjusting things. No esc or reciever included.
$230obo or trade for comm lathe.
5 month old T1 FK 05. Raced about 10 times. Battery strap. Usual scraches on bottom. No stripped screws. Locked front diff but I have the balls to make it a diff again. Bulkheads painted with Duplicolor metalcast for an annodized look but can be removed if you want. Chassi prefectly flat. Will include painted Ride Stratus body, spare c-hubs, spur gear, all the extra parts it comes with, diff lube and shock oil, 4 white, 2 yellow and 2 light blue springs, a set of 2 run cs-27 tires, and some Speed mind battery heat sinks.
$300
XXX-S g+ with a butt load of spare parts such as front and rear arms, front and rear hubs, knuckles, sway bars, springs, cs-27's.
$100 obo
$230obo or trade for comm lathe.
5 month old T1 FK 05. Raced about 10 times. Battery strap. Usual scraches on bottom. No stripped screws. Locked front diff but I have the balls to make it a diff again. Bulkheads painted with Duplicolor metalcast for an annodized look but can be removed if you want. Chassi prefectly flat. Will include painted Ride Stratus body, spare c-hubs, spur gear, all the extra parts it comes with, diff lube and shock oil, 4 white, 2 yellow and 2 light blue springs, a set of 2 run cs-27 tires, and some Speed mind battery heat sinks.
$300
XXX-S g+ with a butt load of spare parts such as front and rear arms, front and rear hubs, knuckles, sway bars, springs, cs-27's.
$100 obo
Last edited by Jimmy Morris; 08-23-2005 at 07:02 PM.
#3
Bump up for a nice car and ultra pimp team mate!
#12
I have decided to keep the Xray due to the fact I'm an idiot and shorted a pack on the chassi. The resin burnt out of a spot about 1/8 inch in diameter. If you don't mind the chassi being burnt then it's still for sale but I didn't want to sell it like that. It doesnt effect flex at all and I put thin CA on the spot and sanded it flat. I'd still like to get 300 for it so I'll throw in a reedy TI 7x2 that I never run anymore. Comm has been cut one time, and it's been ran about 4 times. The CRC and losi are still for sale.
Last edited by Jimmy Morris; 08-28-2005 at 12:07 PM.
#15
Haha, buttload.