1515 2.5D 1650kv F/S
#1
1515 2.5D 1650kv F/S
This is a Tekno edition hand wound Neu motor, 1515 2.5D depending on where you look it's anywhere from 1600-1700kv. The only difference between with the Tekno edition is they are closed endbells unlike the ones Neu sells for helicopters, it also has a flat spot machined on the shaft for a pinion set screw. I ran this in a converted RC8T on 5s, I also had fun with it in an emaxx on 4s. Very powerful motor, runs cool, never above 168 in my experience. I'm out of 1/8 and this motor is going to waste. New these where $300, asking 140or BO shipped in the USA
One of the screw holes is stripped, other three are fine. Also RC-monster.com sells a plate for $10 that screws into all holes as provides new ones.
One of the screw holes is stripped, other three are fine. Also RC-monster.com sells a plate for $10 that screws into all holes as provides new ones.
Last edited by JT13031; 04-24-2014 at 08:27 PM. Reason: Price